Slaughter Pig Equipment Scalding Tunnel Slaughter Pig Equipment Scalding Tunnel is a special equipment developed by our company for slaughtering pig perm recently. It can be used in combination with screw shredder to meet the requirements of high efficiency and continuous production, such as performance, effect, automation and reliability. It meets the hygienic standard of pig slaughtering industry, and its perfect performance has the leading level in China. It is the first choice equipment for large pig slaughtering and adding enterprises in our country at present. The equipment consists of hot pool, rotary wheel, conveyor track, steam heating, water supply, water circulation, temperature automatic control system.
The working principle of slaughtered pig carcasses is drawn by conveyors into the canal scalding pool. The water temperature of the scalding pool is controlled between 62 ºC ±1, and it takes about 3 to 5 minutes from the hot pool to exit the hot pool, when the porcine hair softens and the pores dilate. By the conveyor traction into the automatic screw depilator for depilation.
Installation and commissioning 1) installation requirements: check the equipment during the transportation whether there are bumps damage. The equipment should be placed on the basis according to the process requirements, and the bottom surface should be in good contact with the foundation and be in a horizontal position; 2) debugging: check whether the components are loose, leaking, leakage, temperature control power connection is reliable or not before the operation of the equipment, all normal after put into use.
Test-run open-water valve will put water to a certain water level closed, open steam valve water heating. Start the conveyor from slow to fast operation, check whether the conveyor track blocking phenomenon. When the water temperature reaches the set temperature, the electromagnetic valve automatically closes, after all normal, can carry on the production operation.
The main points of safety operation are: 1) strictly prohibit maintenance operation while the equipment is in operation; 2) manual operation, paying attention to the leakage of water and steam in the connection part of the pipeline; 3) cutting off the power supply and closing all valves after the work is finished; 4) the operator should have the knowledge of mechanical and electrical operation; 5) the operator should be familiar with the structure, performance, safety regulations and instructions of the equipment; 6) the operator should be trained and licensed. 7) routine inspection should be carried out before each shift; 8) users must establish necessary rules and regulations and safety operation rules;
Use, maintenance and maintenance 1) the equipment has been inspected before leaving the factory, but it may be damaged or broken down by factors such as transportation, loading and unloading after leaving the factory. Therefore, it is necessary to carry out a comprehensive inspection of the whole machine, after making sure that all parts are in good condition, It can only be installed and used. 2) after installation and use, the machine should be overhauled regularly in addition to the usual maintenance, and the badly worn parts should be replaced in time to ensure the normal operation of the machine. 3) ironing water temperature: 62 ±1 ºC 4) after the shift, open the water release valve to discharge the sewage in the machine, and clean all parts of the machine, pay special attention to the removal of pig hair and dirt.
Maintenance: the equipment is inspected regularly, and any parts that do not meet the requirements should be repaired, adjusted or updated immediately.
The repairs should be as follows: 1) the replacement should be the same as the raw material while repairing; 2) the canal hot pool should not be maintained and repaired when it is in working condition.
Complaint
