12V/24V 20A IP68 Water Proof Solar Street Light Charger (IR1220)

Characteristics:
Control circuit: use MCU and professional software as the control center to fulfill intelligent system control.
Charging mode: use PWM high efficiency charging way. Boost, recovery and float charging auto work for battery long-life. Use temperature compensation.
High accuracy over discharging control by the discharging rate: Over-discharging control voltage modified by the battery discharging rate curve.
Self protection: protection to overload, outside and inside short circuit, reverse connection, thunder and lightning, PV panel reverse current, over charging and discharging etc. during the short circuit and overload protection, no any component will be damaged and need change, include fuse.
LED indication on system condition: LED indicating the system of charging, overcharge, power full, power low, over-discharge, over load, out short circuit, load on/off, etc.
Industry level production standard: wide temperature running area -35ºC to +65ºC
No adjustable hardware part: use flash memory to save all work control point instead of adjustable resistance, to protect the control work point from going off as the adjustable resistance value is easily changed by temperature and vibration, in order to make sure the control accuracy and reliability.
Operation: easy to operate, robust in design.

Type	SBP-SC-5I	SBP-SC-10I	SBP-SC-15I	SBP-SC-20I
Rated charge current	5A	10A	15A	20A
Rated load current	5A	10A	15A	20A
Work voltage	12v; 12/24V Auto
Over load, short circuit protection	1.25 rated load current 60sec, 1.5 rated loads current 5sec, over load protection action. ≥3 Rated load current short circuit protection action.
No load current	≤6mA
Charging circuit voltage drop	≤0.26 V
Load circuit voltage drop	≤0.15 V
Over voltage protection (Solar panel side)	17V; ×2/24V
Work temperature	Industry stage:-35Cto +55C;
Boost charge voltage	14.6V;×2/24V;(keep 10min)
Direct charge voltage	14.4V; ×2/24V;(keep 10min)
Float charge voltage	13.6V; ×2/24V;
charge return voltage	13.2v;×2/24V;
Temperature compensation	-5mv/C/cell (Boost charge, Direct charge, Float charge, charge return voltage);
Lower voltage indicate	12.0V;×2/24V;
Over discharge voltage	11.1V(no load)- real-time modified voltage by the discharge rate;×2/24V;
Over discharge return voltage	12.6V; ×2/24V
Control mode	PWM charge mode; modified discharge voltage by the discharge rate