Allloy Steel Drain Pan for Aluminum Casting
Product Description
I. Ingot Mold Introduction
Ingot mold, ingot mould, are cast steel molds for the casting of aluminum ingot for remelting storage and transportation.
We currently produce a wide range of sow mould types to many customers around the world who have benefitted from our high quality standards at very competitive pricing.
It customized depends on a variety of factors such as aluminium quantity production, furnace sill heights, fork truck capacity and favoured designs.
1. Material: cast steels AISI 8630, 1028, GS20Mn5, GS45 etc, or as per your requirements.
2. Mechancial properties:| Tensile strength | Min.730MPA |
| Yield strength | Min.590MPA |
| Elongation | Min.17 |
| Redution of area | Min.35 |
3.Delivery condition: normalized
4.Quality assurance
The fabrication route is governed by the provisions of the implemented Quality System ISO.
The standard documentation ensures the full traceability of every process step
Mechanical properties and non-destructive examination;
Dimensional check supported with a "as-built"ko sketch;
Record of the quality heat treatment
II. Ingot mold Advantage
Custom designed ingot sow molds, suited specifically to your needs
Fully cast fork pockets
Tight Tolerances
Fine Surface Finish
Cast feet/lugs for ease of material handling
Cast steel alloy
Several standard specifications readily available
III. Ingot Mold Parameter
IV. Production Equipment
V. Our Sow Moulds
Complaint
