Complaint
| Model No. | YTH-080 | YTH-150 | YTH-225 | YTH-408 | YTH-800 | YTH-1000 | |
| W×H×D (cm) Inner chamber size(cm) | 40×50×40 | 50×60×50 | 60×75×50 | 80×85×60 | 100×100×80 | 100×100×100 | |
| W×H×D (cm) Exterior chamber size (cm) | 60x171x120 | 70x173x130 | 80x172x154 | 100x182x161 | 120x190x180 | 120x190x200 | |
| Temperature range | -70ºC,-60ºC, -40ºC, -20ºC, 0ºC~150ºC,other temperature can be customized | ||||||
| Humidity range | 20%RH~98%RH(low humidity10%RH~98%RH or 5%RH~98%RH can be customized) | ||||||
| Temp.humi.fluctuation | ±0.3ºC;±0.5%RH | ||||||
| Temp.humi.uniformity | ±2ºC;±3%RH (empty load, 30 minutes after stablization) | ||||||
| Temp.humi.resolution | 0.01ºC;0.1%RH | ||||||
| Heating&cooling time ºC/min | Heating rate 3ºC/min,cooling rate 1ºC/min(average rate, non-linear change) | ||||||
| Exterior chamber material | Cold rolled plate + Powder coating | ||||||
| Interior chamber material | SUS#304 Stainless steel | ||||||
| Insulation material | PU+ fiberglass wool | ||||||
| Circulation system | Centrifugal fan air circulation system | ||||||
| Heating system | SUS# Stainless steel high-speed heater | ||||||
| Humidification system | Electrothermal steam humidification | ||||||
| Dehumidifying | ADP critical dew point cooling / dehumidifying method | ||||||
| Refrigeration system | Compressor + Finned evaporator + Air(Water) cooled condenser | ||||||
| Controlling system | Touch screen controller+SSR+PID | ||||||
| Other components | Vacuum glass observation window Test hole (50mm) Control status indicator Interior light Loading shelf (2pcs, height adjustable) | ||||||
| Safety protection device | Overheat protection circuit breaker Humidification system overheat protection Compressor overload protection Control system overload protection Overload indicator Phase sequence protection Water shortage protection High voltage and low voltage protection Over temperature protection Water supply delay protection Fan overcurrent protection | ||||||
| Power supply | AC 1Ψ 220V; 3Ψ 380V 60/50Hz | ||||||
| Customization service | Non-standard or special requirements can be customized. | ||||||
1. Pre-sale service : Confirm customer's requirement to send suitable proposal.
2. Make final confirmation before production(machine outlook design and technical parameters).
3. Update the latest production status to our customer and prepare full sets of machine operation documents and operation video(if customer need). We also welcome our customer to our factory for check before delivery.
4. After-sale service: Provide 1 years warranty for spare parts.
Overseas technical support and onsite installation is available.
24 hours standby on skype, wechat, phone,etc.
In the past years, Yuanyao has exported more than 2,000 chambers to more than 70 countries all over the world.
