Fiberglass Complex for Pultrusion of Polyester Surface Veil and Continuous Filament Mat

Fiberglass Composite Mat EMS485 of Nanjing Tianming:
  The composite mats are combined with continuous filament/chopped strand and polyester surface veil. It is a high-tech product. And we have its independent intellectual property right and patent. The composite mat has the characteristics of high strength, fast flow of resin between layers, easy-rolling resin and good flat permeability. The continuous filament and polyester surface veil composite mat has higher strength and more clear surface. These two kind mat widely used in pultrusion products, RTM products and also high quality hand lay-up products. The stitched fiberglass and polyester surface veil composite mat, and the multiaxial fabric and polyester surface veil composite mat, solve the question caused by the stitched mat-the reinforced product's surface aging problem, and also make the surface more beautiful.

Basic Parameters: 

Model No.:	EMS485
Weight:	1.59oz. per sq/ft or 485grams per sq/m
Width:	up to 1200mm
Size of the Inner Carton Tube:	Length 41* Diameter 3" * Thickness 0.2" or Length 1040* Diameter 77 * Thickness 5mm

Qualified by the Third-part Test:
• The odour characteristics - RA
• VOC - SGS
• Asbestos-free - SGS
• RoHs - SGS
• SOC - Shimadzu
etc.

Uses: 
Packaging:
• Tied with plastic rope
• Covered with a plastic bag
• Packed in a carton and sticked with label
• Packed by pallet with shrink wrap and shipping mark

Loading Quantity:
One plastic bag and carton for a roll with N.W.30kg. 12 or 16 rolls on a pallet. 20 pallets (10 pallets with 12 rolls, 10 pallets with 16 rolls) in one 20' container, that is N.W. 8.4t in one 20' container.

Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.

Fiberglass Composite Mat Series:

Model No.	Weight		Width		Loss on Ignition	Moistrure	Net Weight per Roll		Use And Craftwork
	(oz. per sq/ft)	(grams per sq/m)	(inch)	(mm)	(%)	(%)	(lb)	(kg)
EMSC-P	0.98/1.47/2	300/450/600	47-94.5	1200-2400	2-8	≤0.2	66	30	Pultrusion / Winding
EMSC-R	0.98/1.47/2	300/450/600	47-94.5	1200-2400	2-6	≤0.2	66	30	Injection
EMSC-M	0.98/1.47/2	300/450/600	47-94.5	1200-2400	2-8	≤0.2	66	30	Molding & Hand Lay-up
EMSP	0.79	240	41-94.49	1040-2400	2-8	≤0.2	77	35	Pultrusion / Compression Molding
EMSP	1.10	335	41-94.49	1040-2400	2-8	≤0.2	77	35	Pultrusion / Compression Molding
EMSP	1.60	485	41-94.49	1040-2400	2-8	≤0.2	77	35	Pultrusion / Compression Molding

Our company:
Our advantage:
1. Provide the high quality and low price product;
2. 24 hours online reply(English, Spanish and Chinese);
3. The most satisfying service Offered;
4. The safest package and transportation Offered;
5. Good after-sale service offered;
6.Your business relationship with us will be confidential to any third party.

FAQ:
Question 1: Are you a factory or a trade company?
Answer: We are a factory and have our top sales for the trade service.

Question 2: Can I try to get a SAMPLE before the order?
Answer: Sure. You can ask for the samples. Usually they're free.

Question 3: How about the lead time?
Answer: Within15-20 days after getting the prepayment.

Question 4: Where is your factory located? How can I visit there? 
Answer: Our factory is located in Nanjing, Jiangsu, China. You can fly to Nanjing airport directly. 
               Welcome to your visit!

Question 5:Can you customize the product according to our needs?
Answer:Of course,Our company has more than ten years of experienced R & D design team, can customize products according to your needs.