| NO. | ITEM | DESCRIPTION |
| 1 | Model | GM-2600 |
| 2 | Dimension of M/C | 3100*1000*2200mm |
| 3 | Weight | 5700kgs |
| 4 | Total power | 30kw |
| 5 | Main motor | 7.5KW; 3 phase AC power 50Hz/ |
| 6 | Product density | 300~1000g/m2(depend on the raw material type also product requirements and No of units) |
| 7 | The average output | 3~6m/min |
| 8 | Protection | Main motor overload protection |
| 9 | The control mode | Constant power & Inverter control |
| 10 | Working width | 2400mm/adjustable/cut at mid/product width max 2400mm |
| 11 | Needle plate | The first 5000holes, the second 6000holes |
| 12 | Bearing | KOYO/Or the same quality |
| 13 | Type of holes | Diameter2.02mm/An inverted cone |
| 14 | Electrical components | ZhengTai or DELIXI |
| 15 | Inverter | ZhengTai |
| 16 | Fabric | Recycled material or man-made fiber material or mixing material |
| 17 | Fabric speed | 3-8m/min(depend on the raw material type also product requirements) |
| 18 | Trip of needle | 50 mm or as your requirement |
| 19 | Transfer roller | Diameter:168mm/ Chromium plating process/high quality 50# steel |
| 20 | Needle plate | High strength plate and shock shape /totally 20 mm thickness |
| 21 | The main shaft & other work shaft | Diameter: 80mm/ Dynamic balance and strength strengthening heat treatment/high quality steel |
| 22 | Print Color | As client's requirement |
| 23 | The control cabinet and panel | Digital display instrument, and equipped with knob regulator, professional electric schematic diagram |
| 24 | Note | - CNC cutting equipment and machining center equipment will be used in the manufacture of the machine.
- All rotating shaft through dynamic balance test.
- Shaking range must be less than + / - 0.55 mm, and does not influence the movement of the needle and alignment need hole (based on the correct installation and the base must be in the same plane under a high speed over 40Hz)
|
Complaint
