Complaint
Conveyor Skirtboard Rubber Skirting Polyurethane offers excellent wear resistance, which can be installed on conveyor belt sides to keep material on conveyor belt and reduce spillage.
Hardness of conveyor polyurethane skirt board can be produced as per your request, the common harness is 60a, 70a 85a.
Also polyurethane skirt can be produced with 35 degree or 45 degree bevel edge.
Beveled edge that matches the troughing angle of your belt, eliminating the "break-in" adjustment and providing an even greater advantage.
Related Products:
Double Dual layers structure, inside layer keeps materials, outside layer prevent dust-leakage.
The parts where contact the belt is made of polyurethane, which has longer lifetime and do not damage the belt.
Clamp units are easy to install, adjust and maintain.
Features of conveyor dual seal rubber polyurethane skirting:
* Provides effective sealing on any speed belt.
* Offers dual life - dual sealing system in a one-piece construction.
* Reduces dust leakage, Wear resistant, Low contact pressure, Long life, Belt friendly.
* Lightweight, compact and smaller footprint.
* Easy to install.
* Available in a variety of widths and thicknesses, in lengths of 10m 15m 20m 30 metres.
* Outside layer seal is applicable on 0°, 20°, 35° and 45° Troughing Angles.
Double sealing skirting rubber, also called double lips skirting, double seal skirting, features its special structure, as belows:
1. The sealing system is a low-maintenance design that provides an effective seal without the application of downward force onto the belt.
2. It is recommended that appropriate wear liners be installed on the inside of the chute to protect the sealing system from material side-loading forces.
3. It is composed of a single strip of rubber fabricated with an integral "outrigger" strip to form two sealing barriers.
4. This skirting will provide dual sealing effectiveness while allowing the simple installation of single-strip systems.
5. The sealing strip is clamped against the metal chute wall above the belt.
6. The strip's primary leg is installed to touch the belt, forming a flexible wall to contain fugitive material. The sealing strip's "outrigger" leg will be installed so it lies on the outside of the belt, away from the material load.
Main Products:
