3.Main Components
1) Feeding Platform with pre-cutting Device-----------------------1 Set
2) Roofing Sheet Roll Forming Machine----------------------------1 Set
3) PLC Control System------------------------------------------------1 Set
4) Hydraulic Pump Station--------------------------------------------1 Set
5) Hydraulic Cutting Device------------------------------------------1 Set
Frame Structure | Steel Plate Welded |
Platform Function | Bearing Guiding |
Extra Function | Pre-cutting |
Operate | By hand |
Item (2) Roll Forming Machine
Under Frame | 400H Beam Welded |
Sidewall Thickness | 18mm Steel Plate |
Roller station | 16 forming units |
Sidewall Connect Bar | 25mm,,zinc plated |
Shaft diameter(Solid) | 70mm-0.01~-0.03 (with key-way) |
Shaft material(Hard) | High grade 45# steel, heated and quenched cylindrical grinding, |
Roller material(Hard) | High grade 45# steel, heated and quenched, hard chrome coated 0.05mm |
Bearing Type | Standard 6210 (wanxiang) |
Screw & Bolt | National Standard |
Transmission Chain | 1.0 inch |
Motor Power | 5.5KW(Lichao,Shanghai) |
Forming Speed | 15-20m/min |
Machine Weight | About 4500 kg |
Item (4) Hydraulic Pump Station(Inside)
Function | Supply power for hydraulic cutter |
Pump Motor | 4.0 KW |
Item (5) Hydraulic Cutting Device (guide pillar)
Frame Structure | Steel Plates Welded |
Working Method | Stop to post ,and post to cut |
Guide Pillar | Long Life |
Cutting Blade | Cr12Mov |
Cutting Tolerance | 10M±2mm |
Auto Controlled | PLC and Encoder |