Mushroom Drying Equipment /Dehydrator for Vegetable and Fruit

Min.Order: 1
Product origin: Guangzhou, Guangdong, China
Infringement complaint: complaintComplaint
US$ 8800 ~ 14000

Description
Product Description

 

 

Working Principle
 

 
How to dry shiitake with KINKAI dryer
  1. Preparation: Pick up shiitake which are about half ripe and not watered for a day. Sort out the picked shiitake into groups, and then expose them in the blazing sun for 2-3 hours to remove some water; put shiitake in the plate with cap face upward and stem face backward on an even basis. Don't overlap or squeeze them, or Shiitake quality will be decreased due to damage. Make sure that shiitake is dried after 6 hours of picking. If refrigeration available, fresh shiitake can be kept longer.
  1. Temperature control: Raise the temperature in the cabinet to 35°C, and then put shiitake into the cabinet. The temperature shall be lower at first, and then raise it gradually. Generally, raise 1-3°C within one hour, and the highest temperature shall be 70-75°C. Dry shiitake at 35-40°C for 6 hours, at 40-60°C for 8-10 hours and at 60°C below for two hours. The higher moisture content is, the more time it takes to dry fresh Shiitake. If the temperature increases abruptly at the beginning, the cap will not be round, chapped and become black, gills will be overlapped, and the activity of enzyme will be damaged. Shiitake will lose its original flavor accordingly. Dry shiitake until it is fully parched. Neither stop heating at will, nor change the temperature at a sudden, or shiitake will become black and its quality will decline.
  1. Humanity control: Exercise strict control over the temperature, and timely dehumidify in the drying process. In the early drying process, dehumidify on a full-load basis as the temperature is 35-40°C; dehumidify at intervals at 40-60°C; and stop dehumidifying as the temperature is higher than 60°C. Shiitake will become white in case of excessive removal of moisture. Hygrophanous and yellow shiitake means that moisture is not removed in a proper way or the temperature is too low, especially heat supply is stopped in the drying process.
  1. Drying quality inspection: After 16-18 hours of drying, open the cabinet door to check dryness of shiitake. Use your finger to press the place where the cap and the stem connects. If there is only indentation, dryness of shiitake is just enough. If you feel very soft and gills are soft too, continue to dry them. Dried shiitake has a unique fragrance with yellow, erect and complete gills. Moisture content in dried Shiitake is less than 13% by weight. Dried shiitake remains its original shape with round and flat cap and natural color.
Successful cases



Feature

• High temperature heat pump drying dehumidifying drying room.
1. Drying process completely meet the requirements of food hygiene.
2. Cleaning and hygiene in the good condition, the finished colour and lustre is bright.
3. Automatic control, reduce the labor and the labor intensity.
4. During drying, there is no water/gas/solids generating, the green environmental protection; Good and comfortable working environment .
5. Long service life, low operating cost, good economy.
6. Temperature and humidity is automatic control; Small fluctuations in the temperature and humidity in drying process, the drying quality is stable and reliable.

Buying Guide 
                
KINKAI   Single Drying Machine
ModelUnitJK03RDJK06RDJK12RD
Power inputKW4.88.515.0
Power supplyV/PH/HZ380V/3PH,50/60HZ
220V/1PH,50,60HZ
380V/3PH,50/60HZ
Rated curentA9.6A(380V),22A(220V)17.030.0
Heating capacityKW10.521.042.0
Cooling capacityKW7.818.032.0
DehumidityL/H12.025.050.0
Max temperatureºC757575
Working conditionºC0-430-430-43
Electric shock protection gradeIII
Max.exhause pressureMPa3.03.03.0
NoisedB(A)757575
Power consumption/HKWH4.88.515.0
Electric heaterkw3.06.012.0
Blowing type/Horizontal blowing 360
Dimension of dryerMM1675*860*12801760*1060*12802120*1360*1590
WeightKG180285480
Item 

Description 

Product Capacity 

Drying Chamber size 

Trolleys Qty 

Remarks 
1Single JK03RD 300kg/batch3160×2070×2200 mm6

Trolleys size;

810×670×1800mm

 

Total 16 trays for one trolleys. 

 

Trays size: 

750×660mm

2Single JK06RD 600kg/batch5700×2170×2200 mm12
3Single JK12RD1200kg/batch5810×3230×2200 mm20
4Double JK03RD800kg/batch7510×2070×2200 mm16
5Double JK06RD1500kg/batch 10530×2070×2200 mm24
6Double JK12RD 3000kg/batch 10750×3230×2200 mm40
Warm prompt: We can make any drying chamber sizes as your required.

Packaging & Shipping






Certification



Our Services
A. Payment service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts) 
B. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
C. After-sales service
1, Technical support for your installation, operation and maintenance. 
2, One year's warranty, and you can pay for extended warranty.

3, Spare parts and technical support at most economic prices after the warranty.

If you are interested in our heat pump dryer, please contact us for more information, such as catalogue, video,etc.




Product Tag:
Related categories:
Scroll to Top