Description
Linear Low Density Polyethylene LLDPE granules
Specification
LLDPE Linear low density polyethylene
Appearance: White/transparent granules
Grade:
1. Blow molding grade,
2. Injection molding grade,
3. Film grade;
4. Extrusion grade.
APPLICATION:
1. Fiber (Carpet, Textiles, Upholstery, etc. )
2. Film (Shopping bags, casting film, multilayer film, etc. )
3. Blow Molding (Medical & Cosmetic container, Lubricant & Paint container, etc)
4. Extrusion Molding (Sheet, Pipe, Wire & Cable, etc. )
5. Injection Molding (Automotive, Electronic, Construction, House wares, Furniture, Toys, etc. )
| Grades ( Linear Low Density Polyethylene) | 7050 | 9050K | 9020 | 7042 | 1802 |
| MFR | g/10min | 2.0 | 1.9 | 1.9 | 2.0 | 2.0 |
| Density | g/cm3 | 0.923 | 0.920 | 0.922 | 0.920 | 0.920 |
| Tensile Strength at yield | MPa≥ | 8 | 8.3 | 8.3 | 10 | 10 |
| Tensile Strength at break | MPa≥ | 12 | 12 | 12 | 16 | |
| Elongation at break | %≥ | 500 | 500 | 500 | 750 | 750 |
| Haze | %≤ | 14 | 17 | | 12 | 12 |
| Fish Eyes pcs/1520cm2 | 0.8mm≤ | 8 | 2 | 2 | 2 | 2 |
| 0.4mm≤ | 40 | 15 | 15 | 10 | 10 |
Complaint
