Shanghai Cixi High quality/High cost performance Flow Switch

CXFR11 series Electronic flow sensor, also known as differential thermal flow sensor and Thermal flow sensor. The set range can be 1-20m/s. Have relay output (230VAC. 4A) and 4-20mA output. Suitable for different kinds fluid. Concise and direct indicator, and with high reliable.

Feature
1, No movable parts.
2, Maintenance free.
3, Easy installation.
4, Suitable for variable diameter demand.
5, Switching value can be adjusted continuously.
6, Extremely low pressure loss.
7, Compact structure.
8, LED indicator display flow trend and switch state.

Technical data
1. Set range: 1^150cm/s( water), 3^300cm/s(oil), 20^2000cm/s(air)
2. Output: PNP, NPN, Relay, NO+NC (SPDT)
3. Power supply: 24V± 20%DC or 230V± 15%AC
4. Switching Current: Max. 400mA(PNP or NPN type ), Max. 4A( Relay type )
5. Unload current: Max. 80mA
6. Flow indicator: LED (6)
7. Set type: Potentiometer set
8. Proof Pressure range: 100bar
9. Temperature gradient: 4 C/s
10. Response time: 1--13s, standard is 2s
11. Initialization time: 8s
12. Electrical protection: Reversed-phase, short circuit, overload protection
13. Protection class: IP67
14. Medium temperature: -20--80C
15. Environment temperature: -20--80C
16. Storage temperature: -20--100C
17. Connection: M12 connector /2m cable (option)
18. Material: Probe is stainless steel. Housing is PBT.
19. Weight: 0.4kg

Most Accurate Control By Electronic Thermal Mass Water Flow Switch                                     -----------We are gold supplier in 9 consecutive years     CX-FS series Electronic thermal mass  flow switch , also known as differential thermal flow sensor and Thermal flow sensor . The set range can be 1-20m/s . Have relay output (230VAC.4A). Suitable for different kinds fluid .Concise and direct indicator ,and with high reliable .     The Principle of electronic thermal mass flow switch based on the principle of thermal theory, there are two resistances in the closed probe . One resistance was heated and regarded as detected resistance , the other one was heated and regarded as standard resistance . When the medium is flowing ,the heat on the heated resistance will be taken away and the resistances' value will be changed . The differential resistances value is the basis of determining the flow velocity . Application: gaseous /liquid The flow switch for ground-source heat-pump is mainly applicable to industrial automation/mechanical equipment/air compressing industry/ refrigeration and air-conditioner. The magnet not contact with flowing water, so can normally work in sewage discharging system. CX-FS-FB Paddle Flow Switch Diameter DN25…DN150 Set range 20…1800L/min(water) Repeatability ±2.5%FS Connection terminal type Output Mechanical switch  NO+NC(250VAC,3A) Pressure proof 16 bar Average pressure loss: 0.08bar( at max.flow rate) Ambient temperature -25…80C Medium temperature 0…90C Interface screw G1"pipe screw Protective class IP33 Weight 0.55kg Material Main body stainless steel Process connection: brass Connection rod brass Baffle stainless steel Seal  NBR Housing ABS CX-FS-FB12 Baffle Flow Switch Repeatability ±2.5%FS Connection terminal type Output Mechanical switch  NO+NC(250VAC,3A) Pressure proof 16 bar Average pressure loss: 0.08bar( at max.flow rate) Ambient temperature -25…80ºC Medium temperature 0…90ºC Interface screw G1"pipe screw Protective class IP33 Weight 0.85kg Material Main body stainless steel Process connection: brass Connection rod brass Baffle brass Seal NBR Housing ABS CX-FS-FPD20 Pointer display type piston flow switch Medium liquid or gas Repeatability ≤±3%full scale Pressure 200bar(stainless steel type)100bar(brass type) Output normally open output Contact capacity 240VAC / 110VDC 1.5A Ambient temperature -20…70ºC Medium temperature 0…70ºC Protection IP65 Outlet M12*1 Material Electronic body PC Switch body stainless steel / brass nickel plating Spring stainless steel CX-FS-FR11 Electronic Flow Sensor Set range 1…150cm/s( water),3…300cm/s(oil),20…2000cm/s(air) Output PNP, NPN, Relay ,4-20mA, NO+NC (SPDT) Power supply 24V±20%DC or 230V±15%AC Switching Current Max.400mA(PNP or NPN type ), Max.4A( Relay type ) Unload current Max.80mA Flow indicator LED (6) Set type potentiometer set Proof Pressure range 100bar Temperature gradient 4ºC/s Response time 1--13s,standard is 2s Initialization time 8s Electrical protection reversed-phase ,short circuit ,overload protection Protection class IP67 Medium temperature 20--80ºC Environment temperature -20--80ºC Storage temperature -20--100ºC Connection M12 connector /2m cable (option) Material Probe is stainless steel . Housing is PBT Weight 0.4kg   CX-FR-FR12 Electronic flow switch Set range 1…150cm/s( water),3…300cm/s(oil),20…2000cm/s(air) Output PNP, NPN, Relay ,4-20mA, NO+NC (SPDT) Power supply 24V±20%DC Switching Current Max.400mA(PNP or NPN type ), Max.4A( Relay type ) Unload current Max.80mA Flow indicator LED (6) Set type potentiometer set Proof Pressure range 100bar Temperature gradient 4ºC/s Response time 1--13s,standard is 2s Initialization time 8s Electrical protection reversed-phase ,short circuit ,overload protection Protection class IP67 Medium temperature 20--80ºC Environment temperature -20--80ºC Storage temperature -20--100ºC Connection M12 connector /2m cable (option) Material Probe is stainless steel . Housing is PBT   Model Connection Notes Accuracy HFS-25 1″-11½NPT Screw Red Case 5% HFS-20 ¾″-14NPT Screw HFS-15 ½″-14NPT Screw JYF-25 1″-11½NPT Screw White Case 2-3% JYF-20 ¾″-14NPT Screw JYF-15 ½″-14NPT Screw Rated Voltage?Rated Amps A.C.125~250V Power(Cosmp.)   Non-inductive Current 12A 1   Full Load 12A 0.75   Locked Roter 72A 0.45   Required Flow for actuating switch (m3/h)   Pipe size (in) 1 1-¼ 1-½ 2 2-½ 3 4 5 6 8   Min. Flow Flow lower,1-2 closed 1 1.3 1.7 3.1 4.1 6.2 8.4 12.9 16.8 46.6   Flow lower,1-3 closed 0.6 0.8 1.1 2.2 2.8 4.3 6.1 9.3 12.3 38.6   Max. Flow Flow lower,1-2 closed 2 3 4.4 6.6 7.8 12 18.4 26.8 32.7 94.2   Flow lower,1-3 closed 1.9 2.8 4.1 6.1 7.3 11.4 17.3 25.2 30.7 90.8