Complaint
| No. | Name | Unit | Detailed parameter |
| 1 | Beam length | mm | 2200 |
| 2 | Guide rail length | mm | 3500 |
| 3 | Effective cutting width | mm | 1500 |
| 4 | Effective cutting length | mm | 3000 |
| 5 | Input power source | 220/380V±10%V AC,50/60Hz | |
| 6 | CNC controller system | SF-2012AH | |
| 7 | Plasma cutting gas | N2,O2,Compressed air | |
| 8 | Flame cutting gas | Oxygen+propane or acetylene | |
| 9 | Cutting speed | mm/min | 20-3200 |
| 10 | Flame cutting thickness | mm | 5-160 |
| 11 | Plasma cutting thickness | mm | 0.3-40(depends on plasma power supply) |
| 12 | Operation precision | mm/m | ±0.2 |
| 13 | Gas pressure | Mpa | Maximum 0.1 |
| 14 | Oxygen pressure | Mpa | Maximum 0.7 |
| 15 | Nesting software | Starcam | |
| 16 | Plasma power |
| No. | Item | Parameter |
| 1 | Working ambient temperature | 0-50ºC |
| 2 | Relative humidity | <90%, non-condensing |
| 3 | Surrounding environment | ventilation,no big impact |
| 4 | Power supply | 3~380v±10% 220v±10% 50Hz |
| 5 | Rated Power | 160W |
| 6 | earthing type | Centralized |
