1.Product attributes:
Marble crystal powder chemical XY-105 is applicable to wet grinding and fine polishing for the stone surface that lost gloss.Repair the worn-out surface and
reproduce the luxury gloss again.It is suitable for marble floor polishing with high gloss,repairing scratches on the marble surface,and form a transparent protective
layer to prevent slipping, stain to be weather-proof.
2.Use the steps Description:
- Sweep the floor to remove loose floor debris.
- Make sure that the floor is free from wax and dirt by stripping it with a wax stripper solution and black stripping pad.
- Rinse or damp mop the floor with clean water, making sure there is no residue of stripper solution left on the floor.
- On a 2-3m2 area, spread 2-4 tablespoonfuls of powder and 150-250ml of water directly on the marble floor.
- Place a low speed (175-300rpm) floor polisher with red polishing pad on top of the marble crystallization powder and buff the floor.
- Do not allow the solution to dry. keep it wet by adding 100-150ml water regularly.
- Using a floor squeegee, inspect the area being crystallized after 4-5 minutes and check if the marble has reacted already.
- If the marble exhibits a wet look gloss already, transfer the used solution on adjacent untreated area by using the floor squeegee.
- Rinse the finished area well with mop and clean water.
- To maximize the product, re-use the solution from step 8 for a few more minutes on the adjacent untreated area before picking it up with a wet vacuum or mop. place new marble crystallization and water on this area and repeat steps 4 to 10.
- After the entire floor has been crystallied, damp mop or scrub the floor (with a clean red pad)and clean water. let it dry.
- Remove the remaining marble crystallization powder residue from the floor by dry buffing the floor. this is done by placing a thick, round circular cloth under the polisher and dry buffing the entire area.
3.Packing:2kg/barrel or 5kg/barrel
4.Storage:Save in the dry place. Save period:2 years
Customers Demo
High Tech Grinding 800-4A High Tech Grinding 700-HP