Complaint
This product is produced by atomization method, which is silver gray irregular round ball. It is used for industrial aluminum powder, ferroalloy refractory material, firework, chemical catalyst, welding rod and so on for steelmaking and chemical industry.Can be produced according to user requirements.
Advantages of Porous 3D Printing Powder
High quality ultrafine particles
Ultra low oxidation rate
High strength
High liquidity
High powder loading rate
| Aluminium Based Alloy Powder AlSi12/AlSi10Mg/AlSi7Mg/2024/6061/7050 welding al powder | |||||||||||
| Code | Chemical Composition(wt%) | ||||||||||
| Al | Cr | Fe | Mn | Ti | Cu | Mg | Si | Zn | Pb | Sn | |
| Al | >99.7 | - | - | - | - | - | - | - | - | - | - |
| AlSi12 | Bal | ≤0.05 | ≤0.25 | ≤0.1 | ≤0.15 | ≤0.3 | ≤0.1 | 11.0-13.0 | ≤0.2 | 0≤.02 | ≤0.02 |
| AlSi20 | Bal | ≤0.05 | ≤0.25 | ≤0.1 | ≤0.15 | ≤0.3 | ≤0.1 | 21.0-23.0 | ≤0.2 | 0≤.02 | ≤0.02 |
| AlSi10Mg | Bal | ≤0.05 | ≤0.25 | ≤0.1 | ≤0.15 | 0.15-0.40 | 0.25-0.45 | 9.0-11.0 | ≤0.1 | 0≤.02 | ≤0.02 |
| AlSi7Mg | Bal | - | ≤0.6 | 0.35 | - | 0.25 | 0.20-0.45 | 6.5-7.5 | 0.35 | N:0.25 | - |
| 2024 | Bal | - | ≤0.5 | 0.3-0.9 | ≤0.15 | 3.8-4.9 | 1.2-1.8 | ≤0.5 | ≤0.3 | - | - |
| 6061 | Bal | ≤0.35 | ≤0.70 | ≤0.15 | ≤0.15 | 0.15-0.40 | 0.8-1.2 | 0.40-0.80 | ≤0.2 | - | - |
| 6063 | Bal | ≤0.1 | ≤0.35 | ≤0.1 | ≤0.1 | ≤0.1 | 0.45-0.9 | 0.2-0.6 | ≤0.1 | - | - |
| 7A04 | Bal | 0.1-0.25 | 0.5 | 0.2-0.6 | 0.1 | 1.4-2.0 | 1.8-2.8 | 0.5 | 5.0-7.0 | - | - |
| 7050 | Bal | ≤0.04 | ≤0.15 | ≤0.1 | ≤0.06 | 2.0-2.6 | 1.9-2.6 | ≤0.12 | 5.7-6.7 | Zr:5.7-6.7 | - |
| 7055 | Bal | ≤0.04 | ≤0.15 | ≤0.05 | ≤0.06 | 2.0-2.6 | 1.8-2.3 | ≤0.1 | 7.6-8.4 | Zr:0.05-0.25 | |
