2PCS Pneumatic Actuator with Double Acting Float Ball Valve

Min.Order: 10
Product origin: Tianjin, China
Infringement complaint: complaintComplaint
US$ 20 ~ 30

Description
2PCS Pneumatic Actuator with Double Acting Float Ball Valve
 
I:Product Description


GT pneumatic actuator is driven by air source through piston in cylinder to drive gear rack and other components, and finally converts to output torque force to control valve opening and closing. It can be divided into two functional specifications: single-acting and double-acting, which can be selected according to the actual situation of customers; it can also be pre-set as positive or negative.

GT pneumatic actuator is a very mature pneumatic actuator, which has a wide range of applications and a long history of use. Compared with other valve actuators, GT pneumatic actuator has obvious price advantages. GT pneumatic actuator adapts butterfly valve, ball valve, cock valve and so on to control valve with 90 degree angle stroke.










II:Main Technical Parameters


Specification Model: GT52K
Model Significance: GT - Pneumatic Actuator Type 52 - Cylinder Cylinder Cylinder Inner Diameter K - Single Action (Spring Reset)
Working itinerary: 90 +5.
Applicable gas source: 0.4-0.7 MPa
Gas source interface: complies with standard
Output Torque: 8-13.3Nm (default 8 springs)
Form of action: single action (spring reset)
Ambient temperature: standard type - 20 + 80.
High Temperature Type - 15 ~+180
Low Temperature Type - 50 +80
Must confirm when ordering!
Solenoid Valve Power Supply: AC220V or DC24V (also according to customer requirements)

For specific output torque, please refer to the detailed table of output torque below.

 
GT Single Acting Output Torque Meter(Nm)
Model

Spring

Number

Air source overcomes spring output moment(Nm)Output Torque of Spring(N.M)
0.4MPa0.5MPa0.6MPa0.7MPa

 0°

Start

 90°

End

 0°

Start

 90°

End

 0°

Start

 90°

End

 0°

Start

 90°

End

 0°

 Start

 90°

End

GT52K87.62.311.56.215.410.119.31413.38
GT63K810.44.816.210.62216.427.822.218.412.8
GT75K820.81.630.814.640.824.650.834.635.419.2
GT83K830.413.644.427.658.241.672.455.642.425.6
GT92K8--60.235.479.654.7997461.736.8
GT110K851.917.980.146.1108.374.3136.5102.594.960.9
GT118K88426.812668.8168110.8210152.8141.284
GT127K812052175107220162285217158100
GT143K8--255.973.6343.8161.5431.8149.5366.2183.9
GT160K8232129342238452349562459411208
GT190K8376.6222.8574420.2771.1617.6969.1815566.4412.9
GT210K8522.4332.8759.4569.8996.4806.81233.41043.8615.2425.6
GT254K8796264109669915961134214115691366904
GT255K81228419.617712051.623141507.628572051.61750.4944
GT300K81968170421771744353730644321375216411168
GT350K83429223246743056591940487165415234231552


III:Product Structure 

 
1Gear4End cap bolt
2Adjusting screw5Aluminum alloy cylinder block
3Combined spring6


IV: Installation Dimensions
GT Pneumatic Actuator Profile Dimension Table
ModelABCDφEφFφGΦhIOKMNPQLPort, Thread
NA=20NA=30
GT52K505974941041212ISO F03 φ36 ISO F05 φ50 M5×8M6×10CH.11CH.1080218125G1/8"
GT63K6070881081181212ISO F05 φ50 ISO   F07 φ70M6×10M8×13CH.11CH.1080218140G1/8"
GT75K65831001201301418ISO F05 φ50 ISO   F07 φ70M6×10M8×13CH.14CH.1080219165G1/8"
GT83K65911081281381418ISO F05 φ50 ISO   F07 φ70M6×10M8×13CH.17CH.1080219182G1/8"
GT92K701001171371472025ISO F05 φ50 ISO   F07 φ70M6×10M8×13CH.17CH.1480219209G1/8"
GT110K901201401601702025ISO   F07 φ70ISO   F10 φ102M8×13M10×16CH.17CH.1480325222G1/4"
GT118K901201401601702840ISO   F07 φ70ISO   F10 φ103M8×13M10×16CH.22CH.2080325294G1/4"
GT127K1031371601801902840ISO   F07 φ70ISO   F10 φ102M8×13M10×16CH.22CH.2080325284G1/4"
GT143K110172198-2282840ISO   F10 φ102ISO   F12 φ125M10×16M12×20CH.27CH.20130327361G1/4"
GT160K110172198-2283640ISO   F10 φ103ISO   F12 φ125-M12×20CH.27CH.28130329378G1/4"
GT190K135224255-2853645 ISO   F14 φ140-M16×25CH.36CH.28130336418G1/4"
GT210K135224255-2853645 ISO   F14 φ140-M16×25CH.36CH.32130440452G1/4"
GT254K159272302-3324075 ISO   F16 φ165-M20×28CH.46CH.32130450603G3/8"
GT255K159272302-3324075 ISO   F16 φ165-M20×28CH.46CH.32130450683G3/8"
GT300K196324350-3804075 200×140-M20×32CH.46CH.32150450700G3/8"
GT350K220380408-43840105 260×160-M20×38CH.60CH.32150470795G3/8"




Q: Are you trading company or manufacturer ?
A: We are factory Located In Tianjin, China.
Q: What's your product range?
A: We produce Butterfly valve, Gate valve, Check valve, Y strainer ,Water Controlling Valve and other Pipe Accessories .
Q: What's Execution Standard?
A: ISO/ANSI/DIN/JIS/ EN/GOST/AS standard.
Q: What's your Strong product ?
A: Centre Line Butterfly valve, Eccentric Butterfly valve ,Resilient Seat Gate valve, and largest size to DN3200 .
Q: How long is your delivery time?
A: Generally it is 10 days if the goods are in stock. or it is 35 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=10000USD, 100% in advance. Payment>=10000USD, 30% T/T in advance ,balance before shipment.




 
Product Tag:
Related categories:
Scroll to Top