Rotary Encoder Clin Encoder

Min.Order: 100

Product origin: Wenzhou, Zhejiang, China

Infringement complaint:

Complaint

US$ -1

Description

Product Description

Rotary Encoder Series
Rotary encoders is a speed and displacement sensor integrating optical, mechanical, electrical
precision technologies, when the encoder drives the optical grating disk to rotate, the length, angle, speed can be measured accurately by converting the grating lines number to pulses numbers.

Main Features:
small size, various types, complete function, high frequency response, high resolution, low
power consumption, stable performance, reliable and long life.

Specification

CHB50S series
Model	CHB50S-N/E/F/L-(100,200,300,360,400,500,600,800,1000,1024,2000,2500)
Main size	External diameter:φ50mm; Shaft diameter:φ8mm
Working power	DC5V-24V
Output mode	N: Open-collector output (NPN)
	E: Voltage output
	F: Complementary output
	L: Drive output
Pulse output	100,200,360,400,500,600,800,1000,1024,2000,2500
Output phase	A B Z or A B Z -A -B -Z
Termination mode	G:Side entry cable
Application	Computer Control Crosscutting Machine and other automation fields .

Working principle

Outline size

Precaution
1). This product is consists of high-precision parts, be sure to handle with utmost care, do not drop.
2). When mounting this product, if decentering tolerance or declination tolerance is too big, may
result in reduce its working life.
3). Make sure that the product is free from impact, vibration, corrosion, high magnetic field, high
temperature, high humidity and acid-alkaline environment.
4). Unnecessary pulses are output when turn ON or OFF, be sure to turn ON the peripheral devices
connect to the encoder 0.5S after turning ON the encoder, and turn OFF the peripheral devices
0.5S before turning OFF the encoder.
5). After wiring the cable with the encoder securely, do not pull the cable with 29.4N or more.
6). If it is near to high voltage line or power supply cable, please use cable tube to cover the wires.
7). When wiring the cable, be sure no short connect between each cable, do not make mistakes in the
wiring, otherwise the encoder may be damaged.
It is suggest to make proper insulation for the cable which is not required for connection
9. Precaution
8). Shielded cable should be proper grounded.
9). Do not disassembly the product

Forward

Related products