0-10V/0-5V/4-20mA Isolated Converter Zero and Gain Adjustable Isolation Transmitter

Min.Order: 1
Product origin: Shenzhen, Guangdong, China
Infringement complaint: complaintComplaint
US$ 20

Description
0-10V/0-5V/4-20mA Isolated Converter Zero and Gain Adjustable Isolation Transmitter
 
Features: 
Zero, Gain, Full scale calibration are available through external multi-turn potentiometer.   
Power distribution in input end for function expansion: 5V,12V,15VDC 
Isolated amplification and conversion on analog signals: 0-75mV/0-10V/0-1mA/4-20mA 
 Precision grade:0.1, 0.2; nonlinearity grade (in full measuring range) <0.2%. 
Isolation power among auxiliary power, analog input, output: 3KVDC  
 Auxiliary power: 5V,12V,15V,24VDC,etc single power. 
 Electro-magnetic anti-interference circuits /shielding measures are required in the field with special EMC.  
Low cost, compact DIP 24Pin, UL94V-0 standard flame retardant package. 
 Industrial Temperature range: -20 ~ +70 ºC 
Applications: 
 Isolated power distribution for passive sensors and signals acquisition and transmission.  
 Distribute power for pre-amplification, electric bridge and other circuits to collect signals.  
 Isolated data acquisition of analog signals from PLC, DCS. 
 Analog signal GND wire anti-interference and data isolated acquisition.  
 DC current/voltage signal isolation, conversion and amplification.  
 Long distance isolated transmission of industrial site signals. 
 Meters, instruments and sensors signal acquisition and transmission.  
 Power monitoring control, medical equipments isolated safety bar.
 
Max. Rated Value:
(If the product operates in the max. rated values in the long-term, may affect the durability, if exceed the max. values, may cause unrepairable damage.)
Continuous Isolation Voltage                                                   3KVDC/rms
Power supply Volt. Input Range:                                                  ±25%Vdd
Operating Temperature                                                      - 45ºC ~ + 85ºC
Wielding Temperature  (<10S)                                                   +300ºC
Voltage Signal Output Min. Load                                                      2KΩ
 
General Parameters:

 
Precision, Linearity Error Grade---------- 0.1, 0.2Backlash  ---------- < 0.5% 
Auxiliary Power Supply----- 5V,12V,15V,24VDCIsolation-------Among Signal Input/Output/Auxiliary Power supply
Operating Temp. ---------- -20 ~ +70ºC  Insulation Resistance ---------- ≥20MΩ
Operating Humidity-------10~90%(No condensation )Withstand Volt.-------3KV(60HZ/S), leakage current: 1mA
Storage Temp. ---------- -45~ +85ºC    Impulse Volt. Test---------- 3KV, 1.2/50us(Peak Value)
Storage Humidity---------10~95%(No Condensation) 
 
 
Technical Parameters:
                                                      
ItemsTesting ConditionsMin.Typical ValueMax.Unit
Isolated Voltage1min 3000 VDC
Gain
 
 

 
  1 V/V
Gain Temp. Drift  50 ppm/ºC
Non-linearity  0.10.2%FSR
Gain Adj. Potentiometer (Adj.)  50K  Ω
Zero Adj. Potentiometer(ZA)  10K Ω
Signal InputVolt. 0 15V
Current 0 30mA
Input Offset Volt.  25mV
Input ImpedanceVolt.  1 
Current 502501KΩ
Distribution Power Supply OutputVolt. 5 15V
Current  20 mA
Ripple Wave  100 mV
Precision  2 %
Signal OutputVolt. 0 15V
 Current 0 20mA
Load CapacityVolt.Vout=10V 2 
Current 0350750Ω
Frequency Response 
 
 120KHz
Signal Output Ripple WaveNo filtering 1020mVRMS
Signal Volt. Temp. Drift   1mV/ºC
Auxiliary PowerVolt.Customized3.31224VDC
 Consumption  0.51W
Operating Temp. -40 85ºC
Storage Temp. -55 105ºC
Note: For the special requirements on the load capacity of voltage signal and current signal, please do notify us when placing orders.
Output Output Load CapacityResponse 
4-20mA≤350Ω, Max. 750Ω
 
(If the 350Ω load is required, please notify us)
≤1mS
0-20mA
 
0-5V≥ 2KΩ
0-10V
1-5V
 
 
Product Model Selection:                                      
      ISO EM U(A)- P- O- SD      
 
                                                 
                                                
Input Voltage /Current                              
  U1:0-5V       A1: 0-1mA                         
  U2:0-10V      A2: 0-10mA                         
  U3:0-75mV     A3: 0-20mA
  U4:0-2.5V      A4: 4-20mA                              
  U8:Customized  A8:Customized                     
 
Auxiliary Power                                      
  P1:DC24V   P2:DC12V                        
  P3:DC5V    P4:DC15V                          
  P8:Customized
                                                       S - Distribution Power Volt. Value
Output                                             D: DIP24 Package, Zero & Full Scale adjustable
  O1:  4-20mA       O2:  0-20mA                          SD1:  5V       SD2: 12V  
  O4:  0-5V         O5:  0-10V                           SD3:  9V       SD4: 15V 
  O6:  1-5V         O8:  Customized                       SD8: Customized
 
 
 
Model Selection Examples:
E.g.:1: Input signal: 0-5V, Output Signal:0-5V,  Auxiliary Power:24VDC,  Power Distribution: 15V / DIP24Package    Zero and Full Scale adjustable.
       Product Model NO: ISO EM-U1-P1-O1-SD4
 
E.g.:2: Input signal: 4-20 mA, Output Signal:4-20mA,  Auxiliary Power:24V; Power Distribution:12V / DIP24Package  Zero and Full Scale adjustable.
        Product Model NO: ISO EM-A4-P1-O1-SD2






Product Tag:
Related categories:
Scroll to Top