Complaint
| Introduction: Polyacrylamide is a linear water-soluble polymer, and is one of the most widely used varieties of water-soluble polymer compounds. PAM and its derivatives can be used as efficient flocculants, thickeners, paper enhancers and liquid drag reducing agents, and Polyacrylamide are widely used in water treatment, paper making, petroleum, coal, mining,metallurgy, geology, textile, construction and other industrial sectors. |
| Item | Anionic | Cationic | Nonioic |
| Appearance | White Granule Powder | White Granule Powder | White Granule Powder |
| Solid Content(%) | ≥88.5 | ≥88.5 | ≥88.5 |
| Molecular Weight(million) | 16-20 | 8-12 | 8-12 |
| Degree of Hydrolysis | 7-18 | / | 0-5 |
| Insoluble Matter(%) | ≤0.2 | ≤0.2 | ≤0.2 |
| Dissolution rate(Min) | 40 | 120 | 40 |
| Residual Monomer(%) | ≤0.5 | ≤0.5 | ≤0.5 |
| Effective pH value | 5-14 | 7-14 | / |
1.Sludge dewatering agent :
municipal and industrial wastewater treatment, activated sludge process.biochemical sludge is often highly hydrophilic colloidal organic content is high,it is difficult to.Cationic polyacrylamide treatment,less dosage,high dehydration efficiency,easy to separate.
2.Papermaking auxiliaries:
Effectively improve the paper strength ,reduce the loss of fiber and pulp , accelerate the filter of water , to enhance the retention and drainage effect . in the process of the process , there is an obvious good flocculation effect.
3.Treatment of Sewage and Organic Wastewater:
Alcohol wastewater , brewery wastewater , monosodium glutamate wastewater , sugar wastewater , meat factory wastewater , beverage factory wastewater , textile printing and dyeing wastewater generally with the negative charge , the treatment effect is higher than that of anionic , nonionic or inorganic salts of dozents of times .
4.Waterworks for River Water Sources:
As for river water tap water plant water treatment flocculating :its flocculating agent of cationic polyacrylamide is widely used in the Yellow River , Huaihe , along the Yangtze River and other rivers near water , the less dosage , good effect , low cost . Especially with inorganic flocculant , the effect is better .
5.Oilfield chemicals :
Thickener Used in Oilfield acidzing and clay anti swelling agent .
Our company technology commissioner respectively on the coal washing wastewater, mineral processing wastewater, dyeing wastewater, Protein purification wastewater, marble cutting wastewater, papermaking wastewter, sewage collection and beaker experiment, the sewage flocculatinon precipitation effect display of polyacrylamide.
Instructions:
1.Make up into a 0.2% concentration aqueous solution.
2.The general dosage is 0.1-10mg/L.
3.Fully dissolve. When dissolving, it is required to fully stir the water body and then slowly and evenly add the medicinal powder to prevent the blockage of pipes and pumps caused by large flocs and fish eyes.
4.The stirring speed is generally 200 rpm, the time is not less than 60 minutes, and the maximum temperature of the liquid medicine should be less than 60 degrees.
5.Select the dosage. Determine the dosage by experimentation before use. Because the dosage is too low, it will not work, and if the dosage is too high, it will have the opposite effect. When the concentration exceeds a certain concentration, PAM will not only not flocculate, but will be dispersed and used stably.
PACKAGE
25kg woven bags with plastic plim;
25kg kraft paper bag.
FACTORY:Customer Visit
Henan Lvyuan Water Treatment Technology Co., Ltd was esteblish in 2002 and specialized in the production of Polyaluminium Chloride(PAC), Polyacrylamide(PAM) and other water treatment chemicals.Our products are widely metallurgy, paer mills, coal washing, textile, printing and dyeing, petroleum, chemicals and urban water supply and drainage and other areas.
With years of experiences and high R&D investment,we have maitained our unique advantages in this industry. In 2011, our factory passed the ISO9001:2008, and get our patents.
We are in search of long-term relationship and strategic partners. Welcom to join us to build a better world together.
Services:
Production team: more than 20 years & Foreign trade team: more than 10 years to provide you:
Quality Control:
1. Customized production and technical support;
2. Quality control thoughtout the whole process;
Factory Price:
1. Factory price;
2. Promotion price for new partner;
3. Promotion support for long term partner;
4. Free sample support;
Services:
1. 24 hours online for better communication;
2. Professional team with fluent English and some other language;
Certifications:
FAQ
Feel free to contact us for factory price and customized solutions.
Our professional team are ready to service you 24/7.
1. What superior advantages could I take?
2. What is your business type?
3.How is the quality control in your factory?
We are factory for more than 20 years.Quality is always our priority, that is why we are still the leading company in this industry.
4. What types of payments do you accept?
We accept all types of payment, to reduce costs for our partner, we will make a decision together for the lowest cost and most convenience.
