Complaint
Use:
This machine is mainly used to laminate andemboss two or three layers of PVC coats with printed wood grain. THesynchronous cooling and edge trimming is completed in one step
Characteristic:
1,Winding tension is controlled by magnetic powderbrake;the material enter the lamination part after be preheated;
2,intelligent temperature gauge controls the proporionalvalve and accurately controls the constant temperature
3,Conduction oil circulation heating,even heating ofcoiled materials
4,Twin-shaft tower roll-over stand controls theunwinding with soft tension and can receive and cut the materials continuously
5,The complete appliance is synchronously controlled byPLC programmable controller
| Laminating Layers | |
| Maximum Material Width | 1500mm |
| Material Thckness | 0.03-0.6mm |
| Machine speed | 60mm/min |
| Laminating Speed | 30-50m/min |
| Diameter Scope of Applied Gravure Cylinder | Φ800mm Φ500mm |
| Preheating Roller | Φ240×1650mm |
| Laminating Roller Heating ROller | Φ450×1650mm |
| Embossing Rubber Roller | Φ360×1650mm |
| Cooling Roller | Φ580×1650mm |
| Total Power | 40KW |
| Gross Weight | 23T |
| Overall dimentsions(LхWхH) | 15000×4000×2200 |
