Building Material Steel Bar Welded Wire Mesh

Features of our concrete reinforcing mesh

· The welded wire fabric makes them easier to work on.

· There are different diameters of steel reinforcing mesh each suited for a particular application.

· There are different designs of steel reinforcing mesh from bent and rolls to flat sheets.

· As per BS 4482 standards and codes, the stainless steel wire used in the manufacture of the
steel reinforcing mesh has a 510MPa tensile strength and 485MPa minimum proof stress.

· The steel reinforcing mesh is rigid making it possible for you to control concrete cover during
construction.

· Manufacturers produce steel reinforcing mesh under SANS1024 Standard Specifications.

· The steel bars stay intact whenever immersed in concrete because they are carefully welded
in mats.

· You don't have to apply additional surface treatment to the steel reinforcing mesh before
use.

· Less field labor needed when making reinforced concrete slabs using this mesh thus
drastically speeding up the construction process.

· The mesh is easy to load and unload, and easy to handle at the working site.

· Properly mixed concrete is poured into the mesh and then given time to dry out. The
concrete, as it continues to dry out, it grips the steel bars tightly creating a bond stress
between these two materials. This bond stress is essential because it reduces bending and
makes reinforced concrete slabs stronger.