Flat and Straight Wall Board Fast Installation Anti-Earthquake EPS Cement Sandwich Panel/EPS Sandwich Panel for Internal Wall

Min.Order: 100
Product origin: Xiamen, Fujian, China
Infringement complaint: complaintComplaint
US$ 12.74

Description

fast installation anti-earthquake eps cement sandwich panel/eps sandwich panel for internal wall

Product Description


Surface: Fiber cement board
Interior filling materials: EPS / cement / fly ash / sand / additive
1. ZJT Sandwich Panel Type
-- With EPS Grain
--With Ceramsite

2. ZJT Sandwich Panel Composition
Face: Calcium Silicate Board
Core: Cement+EPS Polystyrene Foam+Sand

3. ZJT Sandwich Panel Specification and Properties
Specification:
Length: 2270/2440mm
Thickness: 60/75/90/100/120/150mm
Width: 610mm

WHY TO CHOOSE ZJT PANELS?

* Client will have more live space in the building and also we guarantee overall cost and construction time will reduce at least 40%
* Time Saving Up to 10x time faster installation and finishing than competition Blocks
* Directly apply Skim Coating +1 Primer & 2 coat of final paint or direct installation of tile or marble or cladding or 3D wall panel)
* High quality components from reputable brands / No ripples / Flat and straight
* Non-toxic / Eco-friendly 100% non-asbestos
* Sustainability
* Minimal wastage (Scrap 90% Less than Block)
* Handling Lightweight simple installation (NO Crane Required)
* Scrap at site will be very less compared to the block work - 90% less, no wet work (no plaster at all) and site will always be clean
* Strong, Durable, Long Lifespan 70 years
* Gas proof and anti-moth Inorganic substances have insect-resistant, gas proof and anti-moth performances
* Anti-earthquake Grade 8-9
* Moisture proof & Halide Resist
* In-Combustibility - Conforming to the Standard of GB8624-2006 Grade A1

3. HOW TO CHOOSE A PANEL?
ANY CONSULTANT APPROVAL OR LABORATORY TESTS CAN BE DONE AS PER REQUIREMENTS
* As per the specification of your project, please find attached comparison Panel data sheets which will make it easier for you to
compare and decide
* Comparison sheet will give you a clear picture to select which panel and what the thickness should be as per your
specification.
* We Guarantee our panels will give you same or better performance with less thickness
(Egg: 200mm hollow block = 100mmZJT Wall panel)
 








Why We Need Concrete EPS Lightweight Board?
 
EPS Sandwich Concrete Wall Panel is one of the new energy saving light and green building materials,which leads to the promotions by advanced countries.
Lightweight Concrete EPS Wall Panel is a new type of high-grade light wall panel material with EPS mortar as core material, calcium silicate board as the surface material and properly mixed with fly ash, slag and additives.

With the modernization development of housing industrialization constantly, the proportion of the frame structure is increasing year by year, the market prospect of the new EPS Light Weight Sandwich Panel is very bright.



Features of Sandwich Lightweight EPS Wall Board:

(A) Lightweight: The raw materials used are Lightweight aggregates, fly ash,etc, non-reinforced concrete, gravel and other heavy feedstock. So,it has the characteristics of light,
which is only 1/16 weight of the brick and concrete structure.It can significantly reduce the vertical load of the building structure and reduces building weight and project cost.

(B)Insulation Resistance: As this new wall panel is core of EPS insulation materials, which insulation performance is extremely advantageous and meet the building energy efficiency design standards, and rank first among similar products.

(C) Permeability Resistance: The bibulous rate of this new wall panel is only 3.3%,which has reached the international advanced level in the same industry.

(D) Fireproof performance: this kind of wall panel is non-burning, and according to the testing, it is reasonable fireproof materials, for the 90mm thickness wall panel, the fireproof performance can be more 3 hours.

(E) Soundproofing: As new wall panel is using EPS as core, it has good sound insulation and air aspiration, which is more than 45 db sound insulation.




Technical Index

ItemParameter Index Specifications
60mm75mm90mm100mm120mm150mm
1Anti-impact capacity/times≥5≥5≥5≥5≥5≥5
2Anti-bending damage load/times over deadweight≥3.0≥3.0≥3.0≥3.0≥5.0≥5.0
3Compressive strength/Mpa≥3.5≥3.5≥3.5≥3.5≥3.5≥3.5
4Softening coefficient≥0.8≥0.8≥0.8≥0.8≥0.8≥0.8
5Surface density(kg/m²)≤70≤70≤90≤90≤110≤110
6Moisture rate(%)≤10≤10≤10≤10≤8≤8
7Dring shrinkage value(mm/m)≤0.5≤0.5≤0.5≤0.5≤0.5≤0.5
8Hang force(N)≥1000≥1000≥1000≥1000≥1000≥1000
9Sound insulation capacity in the air(dB)≥35≥35≥40≥40≥45≥50
10Fire endurance(h)≥1.5≥1.5≥2.5≥2.5≥3.0≥4.5
11Heat transfer coefficient(w/m².k)≤2.0≤2.0≤2.0≤2.0≤2.0≤2.0
12Inner radiation index≤1 ≤1 ≤1 ≤1 ≤1 ≤1 
13Outer radiation index≤1 ≤1 ≤1 ≤1 ≤1 ≤1 
14Frost resistance(shall show no visible cracks and surface without change)__shall show no visible cracks and surface without change
15The combustion properties(A1 or A2)__A1 or A2
 

Usage:

Red brick for four bedrooms,two living rooms,one kitchen and one bedroom:196m2
ZJT panel for four bedroomd,two living rooms,one kitchen and one bedroom:205m2
ZJT panel can save 9 m2

 

residential building, school,hospital, prefab house, office,

hotel, public construction, entertainment place,etc.

wall/exterior wall/interior wall/super high wall/abnormity wall,

roof, floor, pipe, fire well, equipment partiton,etc.

 1. Non-load bearing wall panel for high grade house

 2. The building with higher requirement of sound proof, fire-proof and damp resistance.

 3. Microclimate adjustment system and passive fire protection system.

 4. Building at seismic area equal to or less than 8 magnitudes.





Installation



Loading Information
 
Items(mm)Single(piece)Load by 20'GPLoad by 40'GP
Kg/pcsKg/m2Qty(pcs)m2TonsQty(pcs)m2Tons
2270×610×600.0847343134331552572726
2270×610×750.1067482523491736450426
2270×610×900.1277562072871632244626
2270×610×1000.1487631892621828038826
2270×610×1200.1798711622241625234926
2270×610×1500.211471061261741818926126
 
2440×610×600.0960402403571542062526
2440×610×750.1180542043041730845826
2440×610×900.1390601682501633650026
2440×610×1000.15100671442141524035726
2440×610×1200.18110741081611221632126
2440×610×1500.22160107781161616725026






About Us

Xiamen ZhongJingtai building materials Co., Ltd, is a professional high-tech research and development company producing new wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport. We respond positively to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture.
We can produce more than 2 million square meters of various wall materials annually.
The light composite wall materials produced by us are environmentally-friendly, highly efficient, light, solid, thin, seismic resistant, good insulation, sound-proof, water-proof, fire-resistant , among other advantages.






Contact Me!!!

Xiamen Zhongjingtai Building Materials Co.,Ltd
Vivian Bao

 
 
Mobile:+8618559217326
 
 
Website:Http://zjteps.en.made-in-china.com

 

Product Tag:
Related categories:
Scroll to Top