Complaint
| NO. | Specification | Quantity |
| 1 | Double-screw extruder with fully automatic loading system | 1set |
| 2 | Die head | 1set |
| 3 | Calibrating and cooling device | 1set |
| 4 | Haul-off machine | 1set |
| 5 | Cutting machine | 1set |
| 6 | Stacker | 1set |
| Machine Model | Production Width (mm) | Production Thickness (mm) | Production Capacity (kg/h) | Total Power (kw/h) |
| SJSZ80/156 | 1220 | 3~30 | 400~450 | 140 |
| SJSZ92/188 | 2440 | 3~50 | 550~600 | 230 |
Technical parameter | |||||
Model | YF180 | YF300 | YF600 | YF800 | YF1000 |
Max.width of product(mm) | 180 | 300 | 600 | 800 | 1000 |
Extruder mode | SJZ51/105 | SJZ65/132 | SJZ80/156 | SJZ80/156 | SJZ92/188 |
Extrusion capacity(kg/h) | 150 | 180 | 360 | 360 | 600 |
Motor power(kw) | 22 | 37 | 55 | 55 | 110 |
Total length(m) | 18 | 22 | 26 | 28 | 32 |
| 2.1 Model | SJSZ-92/188 |
| 2.2 High efficiency screw | Bimetallic Screw-Zhoushan Huachen or as you request |
| Diameter Effective length of the screw | 92mm /188mm 2550mm |
| Material | 38CrMoAlA |
| Surface Treatment Nitrided depth Rotation speed Total motor power Rotation speed | Nitrided and Polished
300kw 1500r/min |
| 2.3 Barrel | Zhoushan--Huachen |
| Material | 38CrMoAlA |
| Inner Surface treatment | Nitrided, ground |
| Heating power | 70KW |
| 2.4 Gearbox | Wuxi Jiawei |
| Material of the house | QT200 |
| Gear type | Helical gears |
| Material of the gear | 20CrMnTi |
| Heat treatment of the gear surface | Quenching |
| Material of the axes | 40Cr |
| Bearings | Imported high bearing |
| Lubricating system | Press system |
| 2.5 Automatic feeder | Spring feeder |
| Method Max transporting quantity Power | With spring powder load system 800kg/h 4.2kw |
| 2.6 Driving motor | Simens Beide |
| Method | AC motor, 110KW |
| Control system | ABB inverter |
| Power | 3P*380V*50HZ or 220V*60HZ (as per your power) |
| 2.7 Dimension | 6mx2mx2.8m |
| 2.7 Electricity equipment: | |
Electrical system
| |
| 3. Mould 3.1 Head of mould Heating 3.2 Forming mould Length of Vacuum calibration mould Operating method Material of vacuum calibration set 4 SDT-7000 vacuum calibration unit | ONE SET- Hubei Hongxing or as your request P20 steel HRC28~40 with heater and ring 3 segments 400mm pneumatic elevation 3Cr17 stainless steel One set |
| 4.1 Model | SDT-7600 |
| Flask length Switch and valve for intaking air and water | 7600mm equipped with the machine |
| Power of vacuum pump Power of water pump | 3×7.5kw 1×5.5kw |
| Total dimension of the machine | 7600×2500×2000mm |
| Weight | 3500kg |
| 4.2 Infra regulating system | one set |
| 4.3 SIC-15W cooling water machine Power External dimension Weight | one set 15kw 1550×900×1240mm 380kg |
| 5. BQY-800 hauling off machine one set Drawing with track tape Frequency regulation Up and down track tape clamping Air tank clamping Elective specification W1000×L3000mm Drawing power of blower 7.5kw Drawing thread speed 0.1~1 m/min External dimension 4000×2150×2350mm Weight 3000kg Valid width of cutting 3000mm Largest hauling-off strength 120KN Largest clamping strength 80 KN | |
| 6. Horizontal Cutting Tractor 6.1 Horizontal cutting | Circling saw cutting, air tank moving and pneumatic clamping |
| Valid width of cutting | ≥1000mm |
| External dimension | 3mx1.6mx1.45m |
| 6.2 Dust collector | one set |
| 7.XLT-800 Automatic Stacker one set Automatic pilling device is composed of a machine tacked, a supporter, a discharge racket and an air cylinder. | |
| Weight 1000kg Mode of discharge Automation External dimension 3.5mx1.5mx1.45m | |
