Description
Product Description1. Collection of Casings
Worn tyres are collected to select suitable casings for tyre retread.
2. Initial Inspection
Each tyre received in a retread plant is subjected to a rigorous visual inspection. Inspectors are assisted by the use of non-destructive sophisticated MELION inspection machine.
3. Buffing After inspection
The tyre's old tread is mechanically removed on high speed buffers. MELION's buffers are extremely accurate and will remove the proper amount of old rubber while turning the tyre to an exact specified diameter and radius.
4. Section Repairs & Skiving
With advances in state-of-the-art repair materials and repair methods, many of these tyres can be routinely repaired and in most cases can be retreaded when the original tread is worn off. The repair station is where any surface injury is treated using effective material and tools for grinding and patching.
5. Cementing and Filling
Even in small injuries it is critical that the injury is cleaned and filled. If this is not done, severe rust, separation and steel cable looseness could take tyre out of service. The injury should be inspected, and then cleaned out with a carbide cutter. After cementing the injury, a vulcanizing rubber stem should be applied to "fill" the injury. This would create a permanent repair that maximizes tyre life.
With MELION designed-and-built spray booth, your cementing operation can be executed in a clean, efficient & environmentally responsible manner.
6. Building - Tread Rubber
In the pre-cure system, the tread rubber has already been vulcanized with the new tread pattern design. The buffed tyre needs a thin layer of cushion gum to be wrapped around its crown area. The pre-cured tread rubber is then applied with the building machine. This is called the building process.
7.a) Enveloping & Rim Mounting
The built tyres are then mounted with envelops and rims to prepare them for curing.
b) or Double Envelope System
For enveloping, tyres are first fitted an outer envelope at the envelope-mounting table before the inner envelope is fitted into them. The enveloped tyres are then vacuumed out for preparation prior to curing. Modern plants have their casings hoisted by monorail systems. With professional planning from MELION engineers, you can be assured of workstations designed to maximize output and ease workflow.
8. Curing by Chamber
The tyre is then placed in a curing chamber and the pre-cured tread becomes adhered to the tyre through a vulcanizing process.
Our wide engineering capabilities and experience enable MELION to build chambers to suit our clients' different preferences for size, steam heated, electric heated, or double heating system, semi-automatic and automatic chambers.
9. Final Inspection & Painting
The retreaded tyre is subjected to a final inspection. This inspection insures that only tyres that meet industry quality standards are allowed to leave the retread plant. All retreaded tyres are encouraged to be returned with the sidewalls painted using a light coat of black tyre paint.
Configuration of Tire Retreading Production Line1.Curing Chamber
| Name | Size(Diameter*length) | Quantity of tire |
| | DN1500*1500 | 4 tires |
| | DN1500*2000 | 6 tires |
| | DN1500*3000 | 8 tires |
| | DN1500*3500 | 10 tires |
| | DN1500*4000 | 12 tires |
| | DN1500*5000 | 16 tires |
| Function | The tyre is then placed in a curing chamber and the pre-cured tread becomes adhered to the tyre through a vulcanizing process. |
| Power | 30kw-90kw |
| Heating Method | Electrical heating, thermal oil heating, steam heating |
2.Inflatable Tire Buffing Machine
| Name | Inflatable Contouring Grinding Machine/Buffing Machine |
| model | FXM-C |
| Scope of Application | 15",16",20",22.5" |
| Dimension | 1920x2150x1850 |
| Weight | 1550KG |
| Technical parameter | (1) grinding head motor power: 11KW |
| (2) Rotation tire matching power: 2.2kw |
| (3) Left-to-Right Limits Control Motor Power: 0.55KW |
| (4) ront-to-Rear Limits Control Motor Power: 0.37KW |
| Function | (1) For tire tread surface radian grinding |
(2) Engineered with tire shoulder side Buffer and tire explosion-proof function
|
3. Tread Building Machine
| Name | Inflatable Tread Press/Tread Building Machine |
| model | TBM-22.5 |
| Scope of Application | 15",16",20",22.5" |
| Dimension | 1770x2000x2010mm |
| Weight | 900KG |
| Technical parameter | (1) Working Pressure: 0.6Mpa |
| (2) Inflation Pressure: 0.15Mpa |
| (3) Roller Motor Power: RV63-0.55KW |
| (4) Chuck Plate Type: 15,16,20,22.5 |
| Function | (1) To press the new tread applied on old casing |
| (2)mainly consists of Frame, Tread Press Motor, Tire Ejecting Motor, Air Cylinders, Pneumatic Components, Vacuum Chuck Plate and Electric Control Panel. |
4.Envelope disassembly machine
| name | Envelope disassembly machine |
| model | LJJ-A |
| specification | 15",16",20",22.5" |
| Outline size | 2.2x1.5x1.6M |
| weight | 350KG |
| Function | For envelope disassembly before and after tire vulcanization, applicable to many kinds of tire |
5. Rim Dismounting Machine
| Name | Rim Dismounting Machine |
| model | JZJ-22.5 |
| specification | 15",16",20", 22.5" |
| Outline size | 1.5x1.3x0.8M |
| Weight | 100KG |
| Function | For disassembling of rim
|
6.Outer Envelope Mounting Machine
| name | Outer Enveloper |
| model | BZJ-22.5 |
| specification | 15",16",20",22.5" |
| Outline size | 2.2x1.5x1.6M |
| weight | 350KG |
| Function | For envelope disassembly before and after tire vulcanization, applicable to many kinds of tire |
Our engineers can design target machines for customers and send them the drawing to confirm. We are always
on the side of saving your cost.
In the process of production, we will take photos and send to customers for their track the progress.
Documents such as packing list, commercial invoice, and bill of lading etc. will be sent after the delivery.
We could supply free English foundation DWG, installation drawing, user guide, maintenance manual and part drawing.
We supply overseas engineer service and help to train your workers to operate the machine.
FAQ 1. Delivery time of the rubber machines?
This is specially designed machine according to your specific requirement.
From engineer designing to production completion, it needs about 25 to 35 days.
2. What does your factory do regarding quality control?
We pay much more importance to quality control from the very beginning to the end of production.
Every machine will be fully assembled and carefully tested before shipment.
3. What's the machine quality guarantee?
Quality guarantee time is one year.We choose world famous brand components to keep our machine in perfect
working condition.
4. Are you able to give installation and commissioning overseas? How long time will it take?
Yes, we can supply overseas service and technical support but customer needs to pay for the cost of the installation.
Small machine usually takes within 2~3 days.
Big plant usually takes about 30 days.
5. How can I trust you to deliver the right machine as I ordered?
We will absolutely deliver a good quality machine as we discussed and confirmed in the order.
The core of our company culture is innovation, quality, integrity and efficiency. Also we have had much good
cooperation with world famous rubber production manufacturers. If you come to our factory, we can show you're
the user around us.
6. How can we go to your side?
We are located in Qingdao City, Shandong province, China. The name of airport is Qingdao Liuting airport.
We will pick up you at the airport.
Packaging Equipment painting completed before delivery, and then wrapped with stretch film, avoid rubbing the paint off the
surface, wooden packaging can be customized, key parts, such as electronic control box, will be wrapped by
shockproof packaging materials, and then packed in wooden cases.
There are 15 experienced engineers and 108 skilled workers in our company, guaranteeing delivery on time as
stipulated in the contract. At the same time, the company established a long-term cooperative relation with Cosco,for ensuring the goods arriving port on time.
If you interested in our products mentioned above, kindly let us know by return email. Then I will supply you with
further information. Meanwhile, welcome to visit our factory!
Complaint
