Complaint
Bright Finish Aluminum Diamond Plate / 3003 Aluminum Plate Width Customized
Commercial Grade 5052 aluminum diamond coils plate 4'x8' for trailer toolbox
Diamond plate , also known as checker plate, tread plate and Durbar floor plate, is a type of metal stock with a regular pattern of raised diamonds or lines on one side, with the reverse side being featureless. Diamond plate is usually steel, stainless steel or aluminum.
5052-H32 is optimal for sheet metal work because of its ability to allow for a tight radius while bending. 5052-H32 contains 2.5% magnesium. It is one of the highest strength alloys of the non-heat treatable grades. ... 6061-T6 is the most commonly used aluminum alloys
5052-H32 Aluminum Sheet is commonly used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums. It is nonmagnetic and not heat treatable
Diamond plate aluminum can be challenging to weld, especially while keeping its attractive cosmetic appearance. The combination of flat and raised surfaces has traditionally presented a problem as well. We can supply stronger, more attractive welds on aluminum diamond plates at lower cost, with higher strength and quality than is commercially feasible. We can also help you produce them under our license if desired. Some advantages of our patented weld process include:
Diamond Plate Aluminum Tread Bright (3003-H22) is a sheet product with a raised diamond pattern and a bright shiny finish for decorative and non-skid applications
Height of the bar: 0.6-1.2mm
Delivery Detail: 15-20days
Length: As Customer's Requirement
Surface: mill finished, painted, brushed, anodized, polished etc.
Surface protection: oleo phobic coating, protective film etc
Productive technology: hot rolling
Standard: GB/T3880, ASTM B209, etc
Factory Certificate: ISO9001
Packing: seaworthy wooden pallet or customized
Loading Port: Shanghai, Ningbo, Tianjin, Qingdao
Our packing meets the sea export standard. PE/PVC protective film or white paper could be covered as customer's need. Special requirements of packing could be negotiate before order.
Diamond plate, also known as checker plate, tread plate and Durbar floor plate, is a type of metalstock with a regular pattern of raised diamonds or lines on one side, with the reverse side being featureless
3003 diamond aluminum tread plate has good corrosion prevention ability, so it can be used for ship deck, floor of the cold storage, truck floor and body. Our customers also use it to make boxes, for decoration. Besides, it is widely used in construction.
Alloy available: 1050 1060 1100 3003, 3105, 5052, 5005, 5754 5083 5182, 6061 6063 6082, 7075, 8011…
Temper: HO, H111,H12, H14, H24,H 32, H112, T4, T6, T5,T651
Surface:Mill/Emboss/Diamond/2bar/3bars/Bright
Thickness: 0.2mm to 300mm
Width: 30mm to 2300mm
Length:1000mm to 10000mm.
| Chemical Analysis of aluminum alloy diamond plate | ||||||||||
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
