Complaint
| Substrates | Dried and sanded existing finishes, all kinds of primer and putty | |||
| Surface Cleaning | Remove wax, silicon and other contaminations with degreaser | |||
| Mixing Ratio | Temperature | Item | Weight | Volume |
| below 25 degree | Fast Primer Surfacer | 100 parts | 3 parts | |
| Fast Drying Hardener | 25 parts | 1 parts | ||
| Thinner | 25-40 parts | 1-1.5 parts | ||
| Pot Life | 25 degree, 45 minutes | |||
| No. of Coats | 2-3coats, 40-60um in total. | |||
| Flash-off Time | 5-10 minutes, 25 degree | |||
| SSpray Gun & Pressure | Gravity Feed 1.4-1.6mm 3-5kg/cm 2 Siphon Feed 1.7-1.8mm 3-5kg/cm 2 | |||
| Drying Time | 25 degree, 2-3 hours | |||
| Sanding | P400-P600 dry or P800-1000 wet. | |||
| Re-coat | After drying and sanding, re-coat all kinds of topcoat. | |||
| Shelf life | 2 years in original sealed can at cool and dry place at 20 degree | |||
| Packaging | Primer Surfacer: 4kg; Hardener: 1L | |||
| Surstrates | Dried and sanded existing finishes and putty |
| Surface Cleaning | Remove wax, grease or other contaminations with degreaser. |
| Mixing Ratio | 1K Primer Surfacer: Thinner=1: 0.8-1.0 |
| No. of Coats | 2-3 coats, total 30-50um |
| Flash-off Time | 5-10 minutes at 25degree |
| Spray Guns & Pressure | Gravity Feed 1.4-1.6mm 3-5kg/cm 2 Siphon Feed 1.7-1.8mm 3-5kg/cm 2 |
| Dry Time | 30 minutes at 25degree |
| Sanding | Dry sanding with P400-P600 or wet sanding with P800-P1000. |
| Re-coat | After drying and sanding, re-coat with all kinds of topcoat |
| Shelf Life | 2 years in original sealed can at cool and dry place at 20degree |
| Packaging | 4kg |
| Substrates | Dried and sanded existing finishes, steel, iron and glass fiber reinforced plastic | |||||
| Surface Cleaning | Remove wax, silicon and other contaminations with degreaser | |||||
| Mixing Ratio | Temperature | Item | Weight | Volume | ||
| Above 30degree | Fast Epoxy Primer | 100 parts | 3.5 parts | |||
| Drying Hardener | 20 parts | 1 parts | ||||
| Thinner | 20-30 parts | 1 parts | ||||
| Under 30 degree | Fast Epoxy Primer | 100 parts | 3.5 parts | |||
| Fast Drying Hardener | 20 parts | 1 parts | ||||
| Thinner | 20-30 parts | 1 parts | ||||
| Pot Life | At 25degree, Fast Drying Hardener: 3-4 hours; Drying Hardener: 4-6 hours | |||||
| No. of Coats | 2 coats, about 30-50 um | |||||
| Flash-off Time | At 25degree, 5-10 minutes between coats. | |||||
| Spray Gun and Pressure | Gravity Feed 1.4-1.6mm 3-5kg/cm 2 Siphon Feed 1.7-1.8mm 3-5kg/cm 2 | |||||
| Drying Time | Item | 25degree | 70degree | |||
| Fast Drying Hardener | 3-5 hours | 40-50 minutes | ||||
| Drying Hardener | 6-8 hours | 50-60 minutes | ||||
| Sanding | Dry sanding with P240-P400, or wet sanding with P600-P800 | |||||
| Re-coat | After drying and sanding, re-coat with putty, primer surfacer and all kinds of topcoat. | |||||
| Shelf Life | 2 years in original sealed can at cool and dry place at 20degree | |||||
| Packaging | Epoxy primer in 5kg, Hardener in 1L, Thinner in 1L | |||||
