Description
Zinc cut wire shot - As Cut or ConditionedZinc shot is made with the process of drawing, cutting and conditioning etc.. And they are used for deburing and cleaning on various Aluminum alloy, Zinc die castings. Because their specific gravity is close to steel and the hardness is low, the deburing can be performed without wearing the products' surfaces. Otherwise distinguished from Aluminum abrasive, the security is nice for much lower kinding point of the dust. And they are also characterized at obvious whitening on the surfaces of the work pieces.Chemical composition of zinc shot | Product | Grade | Chemical composition (%) | Density | Hardness |
| Zn | Fe | Al | Cu | Co |
| Zinc cut wire shot - G3 Conditioned | 0#Zn | 99.99% | 0.004% | 0.003% | 0.001% | 0.003% | 7.1g/cm³ |
45-60HV
|
| Zinc cut wire shot - As Cut | 0#Zn | 99.99% | 0.004% | 0.003% | 0.001% | 0.003% | 35-55HV |
Size Available:0.6, 0.8, 1.0, 1.2, 1.5, 1.7, 2.0, 2.3, 2.5, 3.0 mmSteel Shot - High carbon steel shotHigh Carbon Steel shot are produced by atomization of molten steel followed by a series of thermal and mechanical treatments.
Centrifugalizing process instead of high water jet streams to atomize the liquid steel into more spherical and uniform particles.
Durable with high resistance to impact fatigue, giving it an effective and quick cleaning rate.
The centrifugal atomization process and double heat treatment, as well as continues quality control measures, ensures the shot to be of the highest quality.| Product | STEEL GRIT
STEEL SHOT | Type No. | STEEL GRIT GH/GL/GP10-120
STEEL SHOT S070-S1110 |
| Test Items | Specifications |
| STEEL GRIT | STEEL SHOT |
Chemical Composition
% | C | 0.85-1.20 | 0.85-1.20 |
| Mn | 0.40-1.20 | 0.40-1.20 |
| Si | 0.40-1.20 | 0.40-1.20 |
| S | ≤0.05 | ≤0.05 |
| P | ≤0.05 | ≤0.05 |
| Hardness ( HRC ) | 60-66(GH)
50-60(GL)
42-50(GP) | 40-50 |
| Metallographic Structure | Even tempered martensite | Even tempered martensite |
Steel shot is a widely used abrasive product. Steel shot is a kind of spherical particles made by special treatment of special materials. Firstly, it melts high quality steel block and sprays it with high pressure water to form a microparticle shape. Newly heated and then processed. The pellets are dried and reheated in the furnace to achieve a suitable hardness.The use of steel shots:Cast steel shots are widely used for descaling and descaling before the coating of steel workpieces. In this case, centrifugal shot blasting equipment is often used. The shape of the ball and the small hardness will cause the steel shot to not cause excessive wear on the equipment. Steel shots are also widely used in the foundry industry. After the workpiece is taken out of the mold, the steel material is used to remove the sand from the surface of the workpiece. When steel shots are used with the right equipment, because it is durable, it is definitely the best abrasive for your surface cleaning.
Picture:Processing:ApplicationOur Company:Zibo Yalong Abrasive Co., Ltd, established in 2007, based in Zibo City, Shandong Province, is a leading manufacturer of metallic abrasives. We produce high quality Steel Shot, Steel Grit, Steel Cut Wire Shot, Stainless Steel Cut Wire Shot etc.Packing:
Various Shipping Methods of Cast Steel Shots According to Clients' Requirements
Sea Shipping: cost-efficient, suitable for most clients.
Railway Shipping: especially suitable for clients in Eurasia.
Air Shipping: quick delivery with high cost.
FAQQ: Are you a factory?A: Yes, we are a factory/manufacturer. We established the steel abrasives factory since 2007.Q: What is your products range?A: Our main products are High Carbon Steel Shot, High Carbon Steel Grit, Carbon Steel Cut Wire Shot, Stainless Steel Cut Wire Shot. After years of development, we expanded our products range, Bearing Steel Grit for marble & Granite cutting, Cast Stainless Steel Shot, Zinc Cut Wire Shot, Aluminium Cut Wire Shot, Copper Cut Wire Shot, Garnet Sand, Fused Alumina, Sandblasting Gloves etc. also available!Q: What's the production capacity of your steel abrasives?A: The annul output of steel abrasives is more than 30,000 MT.Q: What's the MOQ for the steel abrasives?A: Usually 2 MT is the MOQ for steel abrasives.Q: What's the payment terms?A: T/T (Bank Transfer) or LC at sight both ok!Q: What's the package method?A: a) 25 kgs/bag, 40 bags/big bags;
b) 1000kgs/big bag;
c) 25kgs/bag, 40 bags/pallet;
d) 25kgs/bag, 40 bags/carton box with pallets,
any other requirements pls feel free to contact us.Q: Can we get your free samples?A: Yes, usually we offer free samples within 500 grams. If you have any other requirements, pls feel free to let us know.Q: Can we visit your factory?A: Yes, we welcome our friends and partners from all over the world! Our factory locate in Zibo City, Shandong Province, China. You can come to Jinan Yaoqiang airport or Zibo railway station. We will arrange car to pick you up to our factory.
Complaint
