Plastic Raw Material HDPE/Free Sample! Blow Molding Grade

MDPE granule:
1. Applications and cable specifications of MDPE granule:
Jacket of optical cable, aerial cable and power cable.
 
2. Description of MDPE granule:
PE compound, based on PE resin, is produced and pelletized with the double corrugated screw, in which various additives are added. The compound is according to GB 15065-94 and IEC 60502. The compound has outstanding performances of processing, physical, mechanical and electrical properties.
 
3. Processing of MDPE granule:
It is recommended that compound should be processed with extruder having a minimum L/D ratio of 25. Compound (not including ZPE) should be thoroughly dried before use,  and the maximum drying temperature should not exceed 100°C.
 
 
 
 
Technical specifications(HDPE) 
Film Grade HDPE

Item	Test condition	Test Method	Value	Unit
Density		ISO 1183	0.944-0.955	g/cm3
MFR	190°C/2.16kg	ISO 1133	0.03-0.07	g/10min
Tensile strength at yield		ISO 527-2	22	MPa
Elongation at break		ISO 527-2	>350	%
ESCR	F50,50°C,100%	ASTM D-1693A	1000	h
VICAT		ASTM D-1525	126	°C

 
Blowing molding Grade HDPE

Item	Test Condition	Test Method	Value	Unit
Density		ISO 1183	0.950~0.955	g/cm
MFR	190°C/2.16kg	ISO 1133	1.7~2.5	g/10min
Tensile strength at yield		ISO 527-2	24	MPa
Elongation at break		ISO 527-2	>600	%

 
Injection grade HDPE

Item	Test Condition	Test Method	Value	Unit
MFR	190°C/2.16kg	ASTM D-1238	20	g/10min
Density	---	ASTM D-792	0.954	g/cm3
Tensile strength at yiled	---	ASTM D-638	28	MPa
Elongation at break	---	ASTM D-638	250	%
Impact tensile strength	---	ASTM D-1822	42	kJ/m2
ESCR		ASTM D-1693	3	---
VACIT	---	ASTM D-1525	127	°C