Ss16 Ultra Violet Sterilization System Drinking Water Disinfection

Ss16 Ultra Violet Sterilization System Drinking Water disinfection



Detailed Product Description
 

Ultra Violet Sterilization System made of SS 316 designed to disinfect potable drinking water, Process water and wastewater without the use of heat or chemicals. Our Standard features of UV sterilization system includes individual lamp indicator, ballast, drain, test port etc. while Optional features include wiper system either manual or programmable automatic, UV monitoring, intensity meter.

Our modular design allows for a wide range of flow rate ranging from 200 LPH to 50000 LPH and larger flows can be handled by manifolding units together. UV Sterilization system are also available with Pre Micron Filtration units to avail the best results by avoiding shadow effect.

Advantages
There are several advantages of using UV water filtration system rather than a chemical 
disinfection solution (such as chlorination):
1.No known toxic or significant nontoxic byproducts
2.No danger of overdosing
3.Does not require storage of hazardous material
4.Adds no smell to the final water product
5.Requires very little contact time




Application
1. Food processing industry, including juices, milk, drinks, beer, practical oil and canned food.
2. Electronic industry.
3. Hospitals, various laboratory and high levels of pathogenic body water disinfection.
4. Households building, residential, office buildings, hotels, restaurants, water factories.
5. Purification and disinfection of shellfish, fish cleaning and disinfection
6. Military camp, field water supply system
7. Urban wastewater disinfection.
8. Swimming pool, other recreational water disinfection
9. Thermal power, nuclear power plant industrial, central air conditioning system cooling water.
10. Biological, chemical and pharmaceutical, cosmetics for the production of cooling water.
11. Sea water, fresh water breeding, aquaculture water
12. Agricultural water disinfection



UV specification
Ultraviolet light treatment is a widely recognized and proven method of disinfection of water and has several advantage over other disinfection methods such as chlorination, ozonation, etc. UV light does not add anything to the water, such as, undesirable color, odor, taste, or flavor, nor does it generate harmful byproducts. It adds only energy in the UV radiation. Also, UV disinfection requires only a fraction of the contact times required by other disinfection methods. It is fast, efficient, effective, economical and environmentally-friendly.

Principle of Operation
UV water disinfection system design has been carefully conceived to provide adequate germicidal dosage throughout the disinfection chamber. The dosage, as it applies to UV disinfection, is a function of time and the intensity of UV radiation to which the water is exposed. Exposure time is related to the flow rate, the higher the flow rate, the lower the exposure time or the lower the flow rate, the higher the exposure time. The UV intensity is the amount of energy, per unit time, emitted by germicidal lamp. The Dosage is the product of UV intensity and the exposure time.

Limitation of Use
The UV water disinfection system NOT intended for the treatment of water that has an obvious contamination or intentional source, such as raw sewage, nor is the unit intended to convert wastewater to microbiologically safe drinking water.

Water Quality (in)
Water quality plays a major role in the transmission of germicidal UV rays. It is recommended that the water does not exceed following maximum concentration levels

Maximum Concentration Levels (Very Important)
Iron≤ 0.3ppm(0.3mg/L)
Hardness≤ 7gpg(120mg/L)
Turbidity≤ 1NTU
Manganese≤ 0.05ppm(0.05mg/L)
Tannins≤ 0.1ppm(0.3mg/L)
UV Transmittance≥ 750‰

Effectively treating water with higher concentration levels than listed above can be accomplished, but may require added measures to improve water quality to treatable levels. If, for any reason, it is believed the UV transmission is not satisfactory, contact the factory.
UV wavelength (nm)

DOSAGE is the product of intensity & time
Dosage=intensity*time=micro watt/cm2*time=microwatt-seconds per square centimeter
(μ W-s/cm2)
Note: 1000μ W-s/cm2=1mj/cm2(milli-joule/cm2)

As a general guideline, the following are some typical UV transmission rates (UVT)
City water supplies850-980‰
De-ionized or Reverse Osmosis water950-980‰
Surface waters(lakes, rivers, etc)700-900‰
Ground water(wells)900-950‰
Other liquids10-990‰
 

model	capacity	Power	inlet-outlet	reactor	panel	Anchor	G weight
	m³/hour	watt	mm	L×W×H	cm	screw	Kg
YLCn-005	0.3	16	1/2″	30×6×11	without	without	5
YLCn-008	1	25	1/2″	47×6.3×11	without	without	10
YLCn-050	2	40	1″	100×9×20	Φ8.9×25 (d×L)	69×4×Φ1	25
YLCn-150	6	80	1+1/4″	100×11×23		69×4×Φ1	30
YLCn-200	8	120	1+1/2″	100×15.9×30	Φ8.9×45 (d×L)	69×7×Φ1	35
YLCn-300	12	160	2″	100×15.9×32		69×7×Φ1	40
YLC-050	2	40	DN25/1″	100×8.9×30	25×30×12 (W×H×D)	60×4×Φ1	45
YLC-150	6	80	DN32/11/4″	100×10.8×30		60×4×Φ1	50
YLC-200	8	120	DN40/11/2″	100×15.9×40		60×7×Φ1	60
YLC-300	12	160	DN50/2″	100×15.9×40		60×7×Φ1	70
YLC-360	15	200	DN65/21/2″	100×15.9×40		60×7×Φ1	120
YLC-500	20	240	DN65/21/2″	100×21.9×50		60×11×Φ1.2	130
YLC-600	25	280	DN80/3″	100×21.9×50		60×11×Φ1.2	140
YLC-700	30	320	DN100/4″	100×21.9×50		60×11×Φ1.2	150
YLC-1000	40	360	DN100/4″	100×21.9×50		60×11×Φ1.2	160
YLC-1200	50	400	DN125/5″	100×21.9×50		60×11×Φ1.2	180
YLC-1500	60	420	DN150/6″	170×27.3×57		120×16×Φ1.4	210
YLC-2000	80	560	DN150/6″	170×27.3×57		120×16×Φ1.4	220
YLC-2500	100	700	DN150/6″	170×27.3×57	60×128×30 (W×H×D)	120×16×Φ1.4	275
YLC-3000	125	840	DN150/6″	170×27.3×57		120×16×Φ1.4	300
YLC-4000	150	1120	DN200/8″	173×32.5×65		120×20×Φ1.6	325
YLC-5000	200	1400	DN200/8″	173×37.7×72		120×22×Φ1.6	350
YLC-7000	300	2100	DN250/10″	175×42.6×80		120×24×Φ2.0	400
YLC-10K	400	2520	DN250/10″	176×52.9×95	60×150×40 (W×H×D)	120×22×Φ2.2	475
YLC-15K	600	3080	DN300/12″	176×78×110		120×32×Φ2.4	600
YLC-20K	800	3920	DN350/14″	Designated	Designated	Designated	Designated
YLC-25K	1000	4760	DN350/14″	Designated	Designated	Designated	Designated