Complaint
Production Description
1, machine introduction: KZPL-GL all-servo flat mask all-in-one making machine consists of 1 set host and 1 set earloop unit. It features auto procedure including auto creasing,overlock, set length cutting of nose bridge strip which is integrated with overlock cloth to make the mask body, conveying the mask body to earloop unit, gluing the strip to the mask nody by unltrasonic with auto counting, unloading the mask into packing unit.
2,input material specification:(standard material of mask)
items | Haning shaft | Width (mm) |
|
| weight |
favric | 3 | 170-200 | Φ600 | Φ76.2 | Max 15kg |
Nose bridge strip | 1 | 1-3 | Φ400 | Φ76.2 | Max 25kg |
earloop | 2 bags | 3 | -- | -- | -- |
3,mask dimentions:175m×95mm(adult):
1) flat mask : 2 ply non-woven mask, 3ply non-woven mask, 4 ply activated carbon mask
2) material of flat mask:
A, 2 ply mask: non-woven fabric, nose bridge strip, earloop
B, 3 ply mask: non-woven fabric, nos bridge strip,earloop, Filter cotton(filter paper)
C, activated carbon mask: non-woven fabric, nose bridge strip,earloop, Filter cotton(filter paper), activated carbon cloth
Technical Parameter
sr. | item | Technical parameters |
1 | machine structure | mainly by aluminium profile |
2 | dimension | 4750(L)*3500(W)*2000(H) |
3 | specification | 175*95(adult) |
4 | designed speed | 130 piece/min |
5 | production speed | 50-100 piece/min(standard mask material) |
6 | mask layers | 3-4 layer |
7 | productivity | 90% |
8 | electric current | 60A |
9 | cable required | 10 square meters |
10 | voltage | 220V single phase |
11 | min.air pressure requirement | 0.6Mpa |
12 | gas consumption | 300L/min |
13 | weight | Approx.1800KG |
14 | ground bearing | ≤500KG/m2 |
15 | protection | protection hood for main transimission parts |
The first layer
wrapping with foam film and stretch film for the special components, in order to avoid moisture.
Second layer
inside of plywood box, adopting small square plywood block and strapping belt to fix.
Third layer
the machine itself has screw fixing holes, so it can be tightly fixed on the bottom of the plywood box through screw and nut.
Fourth layer
in a container, by compact layout, reducing the gap between boxes to avoid shaking. At the same time, reinforcing between the bottom of the container and plywood boxes once again, furthermore using hanging steel wire protection.
More inforamtion, please feel free to contact us by following:
