Sinotruck HOWO Heavy Truck Parts Pengxiang Mt86 FAW Shacman Weichai Dongfeng Benz Volvo Engine Truck Parts

Shandong PX Mine Dump Truck:

Shandong PX Mining Dump Truck
Type:	PX48MT		PX65MT	PX65 SPRINKLER	PX90MTYQ/PX90ATYQ	PX95MTYQ/PX95ATYQ
Driving Cab:	Reversible wide-body offset cab		Reversible wide-body offset cab	Reversible wide-body offset cab	Reversible wide-body offset cab	Reversible wide-body offset cab
Engine Type/ Horsepower:	WeiChai 340 HP		Weichai 380 HP	Weichai 380 HP	WEICHAI 420/430/480 HP YUCHAI 460HP	YUCHAI 520HP/WEICHAI 530HP
Transmission Type:	Fast RTD11509C		FAST 7DS220	FAST 7DS220	FAST 7DS220/8DS240A/Allison 4500	FAST 8DS260/FAST&FC6A250PR
Steering Engine:	ShaShiJiuLong steering engine		ShaShiJiuLong steering engine	ShaShiJiuLong steering engine	Full hydraulic power steering engine	Full hydraulic power steering engine
Front/rear axle:	PX9Tcasting steel front axle/PX 16T  casting dual reduction middle/rear axle		PX13Tcasting steel front axle/PX 25T  casting dual reduction middle/rear axle	PX13Tcasting steel front axle/PX 25T  casting dual reduction middle/rear axle	PX19Twelded steel front axle/PX 35T casting dual reduction middle/rear axle	PX25Twelded steel front axle/PX 35T casting dual reduction middle/rear axle
Frame:	Flexible frame with willow joint 320*90*8		Welded Semi-rigid cube type frame  450*130	Welded Semi-rigid cube type frame  450*130	Welded Semi-rigid cube type frame 450*130	Welded Semi-rigid cube type frame 450*130
Inner dimension of body(mm):	5400*2350*1500		5600*2850*1550	11000*3200*3900	5850*3200*1750	6000*3310*1750
Description:	Chassis base 8+8Two-layer composite,Sideboard 8,Backboard 10,T700High strength plate,Front raise,Cylinder Hyva,U size carriage		Q345 Bottom margin 16mm, Side board12mm, front hoisting,Hyva cylinder,Slope tail box,With tailgate	Q345 material, hydraulic power take-off device, water cannon range >= 25m, sprinkler width >= 14m, electric pipe heating, two high sprinklers and two low sprinklers	Q345 Bottom margin 16mm, Side board12mm, front hoisting,Hyva cylinder,Slope tail box,With tailgate	Q345 Bottom margin 16mm, Side board12mm, front hoisting,Hyva cylinder,Slope tail box,With tailgate
Tyres:	12.00 R20 mining tyre		14.00-24 mining tyre	14.00-24 mining tyre	14.00-25 mining tyre	16.00-25 mining tyre
Front/rear suspension:	Independent suspension		Whole welded equalizing suspension, reinforced removable equalizing shaft	Whole welded equalizing suspension, reinforced removable equalizing shaft	Whole welded equalizing suspension, reinforced removable equalizing shaft	Whole welded equalizing suspension, reinforced removable equalizing shaft
Leaf spring for front, middle, rear axle:	Front: 10,Rear13		15/100*16,12/100*30	15/100*16,12/100*30	Front: Oil-gas spring ,Rear:120*32*11	Front: Oil-gas spring ,Rear:120*32*13
Breaking system:	SORL system		SORL system	SORL system	SORL system	SORL system
Others:	Air filter level 3,exhaust braking, heater for base plate,Rows of stone,Chassis protective,Battery,The fuel tank protective,front  mudguard,rearview mirror reinforce,LED sidelight and taillight,Backup camera		Air filter level 3,exhaust braking,heater for base plate,Rows of stone,Chassis protective,Battery,The fuel tank protective,front  mudguard,rearview mirror reinforce,LED sidelight and taillight,Backup camera	Air filter level 3,exhaust braking,Rows of stone,Chassis protective,Battery,The fuel tank protective,front  mudguard,rearview mirror reinforce,LED sidelight and taillight,Backup camera	Air filter level 3, exhaust braking,heater for base plate,Stone remover,Chassis protection,Front and rear fender,Rear view mirror reinforcement,LED Sidelight and taillight,Centralized ,Backup camera	Air filter level 3, exhaust braking,heater for base plate,Stone remover,Chassis protection,Front and rear fender,Rear view mirror reinforcement,LED Sidelight and taillight,Centralized  system,Backup camera
Curb Weight(kg):	15000		22000	24000	30000	33000
Rated load(kg):	30000		43000	41000	60000	62000
Rated total weight(kg):	45000		65000	65000	90000	95000
Overall Dimension(mm):	8750*2560*3450		8680*3050*3800	11000*3200*3900	9100*3450*4080	9300*3500*4260
Max speed(km/h):	70		42	42	42	42
Min ground clearance(mm):	314		365	380	380	435
Min turning radius(m):	≤8		≤10m	≤12m	≤12	≤12
Max gradeability(%):	30		40%	35%	30	30
Axle base(mm):	3825+1350		3650+1560	4600+1560	3800+1560	3800+1690
Wheel span (front /rear)(mm):	Front:1939,Rear:1840		Front 2368,Rear: 2252	Front 2368,Rear: 2252	Front:2792,Rear:2526	Front:2792,Rear:2526
Oil tank Capacity(L):	400L Steel oil tank		400L Steel oil tank	400L Steel oil tank	450L Steel oil tank	600LSteel oil tank
Body Capacity:	19m³		25m³	40m³	33m³	35m³
Optional:

What can we supply?                                                                                

1.Sinotruk/Weichai engine parts

Crankshaft, connecting rod, cylinder block, cylinder head, piston,flywheel, cylinder liner,piston ,piston rings, piston pin,connecting rod,bearing, crankshaft bearing ,intake&exhaust valve, valvesprings,camshaft, tappets, camshafts bearing, fuel tank, fuel pump, fuel filter,air filter, oil filter, battery,alternator, starter, starter motor, ignition coil,water pump, radiator, fan couplings, fan, thermostat, oil pump,pressure limiting valve ..

2.Sinotruk/FAST Gearbox Parts

Primary shaft, 2nd shaft, intermediate shaft, 2 / 3 associated gear,2nd speed gear(1/2/3/4/5) , reverse gear ,intermediate shaft(1/2/3/4/5),synchronize assembly, synchronizer slider,gearbox ,gearbox shell, gearbox cover, gearbox middle cover, shift fork assembly, PTO...

3.Chassis parts

Clutch cover, clutch disk , wheel hub, brake drum, brake pads ,Brake shoes, lock, wiring harness, drive shaft, front axle, steering knuckle,steering arm, universal joints, rear axle , main reducer,differential,axle, planetary gears, sun gear, pinion and bevel gear, spring, shock absorbers, stabilizer bars,steering pole, straight rod, rod joint, wheel reducer, through axle, rear shell ... ..

 

WHY CHOOSE US:
1.we have 14 years experience in the business of auto spare parts
2.good quality,reasonable lower price
3.fast delivery 
4.with 24 hours online technical support
5.Sample will be offered before the trial order
Note: There are also kinds of products used for heavy truck for you to choose, if any need or interest, welcome to send us your detailed inquiry list.




FAQ

Q1. What is your terms of packing?

A: Generally, we pack our goods in neutral boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 15 to 30 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.