Description
Product Name: Roof Edge Protection Inclined Parapet Wall Fixed Guardrail System
DescriptionLongdyes parapet mounting plate guardrail avoid penetrating the roof membrane by attaching a safety railing to the parapet of the roof. Mounting to a roof parapet can create cost-effective perimeter fall protection. Each railing upright is screwed to the rooftop parapet directly. Each component is modular and fastens to the pipe with set screws. This makes installation very simple, with no special training or tools needed.
Materail
LONGDYES freestanding guardrail is manufactured from the aluminum 6063 or 6061.
The materials have excellent processing performance, excellent welding characteristics and electroplating, good corrosion resistance, high toughness and no deformation after processing, the material is dense and defect-free and easy to polish, easy to paint film, excellent oxidation effect, etc.
Type| Type | Straight | Curved | Inclined | Foldable |
| Min. vertical height | 1100mm | 1100mm | 1100mm | 1100mm |
| Advantage | This simple design fits in perfectly with the clean lines and contours of a building. | Whilst providing the primary function of collective protection, the curved upright system compliments the design of a building. | This variation is inclined at 30°, which adds to the aesthetics of the system whilst making the system less visible from ground level. | When collective protection is not being used, the folding uprights of this variation lie flat and are concealed when viewed from ground level, combining safety with architectural aesthetics. |
Dimension
1. The minimum vertical height of upright is 1100mm.
2. The maximum height between handrail and kneerail is 500mm.
3. The minimum thickness of parapet should be greater than 120mm.
Main parts
Installation 1. Put horizontal bracket onto the parapet then fix it by tapper screws.2. Insert upright module into base then fix it buy set screws.
3. Put handrail and kneerail onto tube fixing then fix them by tightening screws.Common Components | Components | Closure bends | Variable corner | Tube junction | Wall end fixing |
| Description | In situations where guardrail
needs to terminate and cannot be attached directly to a structural element, a closure bend can be specified. This same part can be incorporated into a length of system to designate a safe entry/exit point.
| The Variable Corner allows a system to follow a turn other than 90 degrees. The corner can be used to bend or change direction of a handrail or mid rail. | The tube junction are all available to accommodate all system layouts. | A Wall End Fixing or Wall End Termination is used to the end of the Guardrail system to a supporting wall, parapet or any other stable structure. In connecting the system to a fixed structure using the wall end fixing, it guarantees additional stability for the system without the need for additional counterweights on the final upright posts. |
Advantage 1. Durable aluminium, corrosion-resistant construction.
2. Adaptable to many roof configurations
3. Multiple variations
4. No threading, welding or riveting required.
5. Pre-assembled uprights for quicker installation
6. Can be adjusted on site to suit local conditions
7. Assured design loads
8. Easily installed by lower skilled and therefore less expensive labour.
Packing 1. Handrail pack & Kneerail pack: 5-pcs per pack, wrapped by stretch film.
2. Accessories box: Tube junction, variable corner, wall fixing, closure bends included.3. Parapet Base pallet: Approx. 800-pcs per pallet, wrapped by stretch film.
4. Upright module pallet; Approx. 552-pcs per pallet, wrapped by stretch film.
Delivery
20'GP container
Capable of loading Approx.4000 meters rooftop guardrail system, in standard situation.
Toeboard (Optional item)
On rooftops or surfaces where there is no parapet at the fall edge (or a parapet of less than 100 mm high) a toeboard can be affixed to the base of the guardrail.
·Prevent small objects slip off from the edge.
·Prevent personal slip off from the edge.
Service
1. Timely response by e-mail or online chat.
2. The engineer designing and developing is supplied.
3. High quality produce of industry leading Worksite Safety productions.
4. Required solutions can be responsed rapidly by our engineering team.
5. Installation instructions will be detailed.
6. Large stocks can ensure you get the product when you need it.
Complaint
