Complaint
Mechanical Field-Mountable Fiber Optic Connector (FMC) is designed to simple the connection without fusion splicing machine. This connector is quick assembly which requires only normal fiber preparation tools: cable stripping tool and fiber cleaver. The connector adopts Fiber Pre-Embedded Tech with superior ceramic ferrule and aluminum alloy V-groove. Also, transparent design of the side cover which allows visual inspection.
1) Factory-installed fiber stub.
2) No epoxy and polishing required, No special tools needed when installed.
3) Allows up to three re-termination result.
4) Easily installed, Quick and easy fiber termination in the field.
5) Only 30 seconds needed to learn the process of installation and making.
6) Cost effective, Warranty: One year.
7) Fast connecting and repeat, No special tools needed when installed.
8) Can be made on-site without splicing connectors.
9) Eliminates cable excess length and pigtail splice storage.
10) Can be intalled and maked repeatedly thus avoiding loss.
1.Patch panels
2.Distribution frames
3.Maintenance or emergency restoration of fiber networks
4.FTTH Outlets
5.Connection at the desk for LAN environments
| Item | Parameter | |
| Cable Scope | 3.0 x 2.0 mm and 1.6*2.0mm Bow-type Drop Cable | |
| Size: | 52*9*8.1mm | |
| Fiber Diameter | 125μm ( 652 & 657 ) | |
| Coating Diameter | 250μm | |
| Mode | SM | |
| Operation Time | about 15s(exclude fiber presetting) | |
| Insertion Loss | ≤ 0.3dB(1310nm & 1550nm) | |
| Return Loss | ≤ -50dB for UPC, ≤ 55dB for APC | |
| Success Rate | >98% | |
| Reusable Times | >10 times | |
| Tighten Strength of Naked Fiber | >5 N | |
| Tensile Strength | >50 N | |
| Temperature | -40 ~ +85 C | |
| On-line Tensile Strength Test (20 N) | IL ≤ 0.3dB | |
| Mechanical Durability(500 times) | IL ≤ 0.3dB | |
| Drop Test(4m concrete floor, once each direction, three times total) | IL ≤ 0.3dB | |
