Description
Longer Service Life Boron Carbide Nozzle (B4C insert), More Specifications Customizable The hardness of boron carbide is only secondary to diamond and CBN. The density of the boron carbide products produced by us is close to its academic density 2.52g/cm3. We not only supply high quality high purity boron carbide powder, but also provide customized boron carbide B4C nozzles with longer service life.
Its advantages are: longer service life, high hardness, high wear-resistance ability, anti-corrosion, lower cost per use, reducing down time. It's the ideal material for sandblasting nozzle and mechanical seal.
Boron carbide can be used to manufacture gun nozzles in the arms industry, which is extremely hard and wear-resistant, no reaction with acid-base, high/low temperature resistance, high pressure resistance, crystal system: hexagonal, density: 2.52g/cm3, Mohs hardness: 9.36, microhardness 5400-6300kg/mm2, bending strength ≥400Mpa, melting point: 2450ºC. Because it has the characteristics of wear resistance and high hardness, Boron Carbide Sandblasting Nozzle will gradually replace the known tungsten carbide and silicon carbide, silicon nitride, alumina, zirconia and other materials sandblasting nozzle in the future.
| Service Life |
| Nozzle Material | Service life(h, by time) |
| Steel grit/shot | Silica sand | Brown aluminium oxide |
| Alumina | 20-40 | 10-30 | 1-4 |
| Tungsten Carbide | 500-800 | 300-400 | 20-40 |
| Silicon Carbide | 600-1000 | 400-600 | 50-100 |
| Boron Carbide | 2000-2500 | 1000-1500 | 500-1000 |
| Specifications |
| | Item | Specifications(mm) |
| I. D Φd | O. D ΦD | Length L |
| BCN-1301 | 2-14 | 16-37 | 10-110 |
Note: Special requirement on specifications can be satisfied through discussion.
| Specifications |
| | Item | Specifications(mm) |
| I. D Φd | O. D ΦD | Length L |
| BCN-1302 | 3-14 | 16-30 | 50-110 |
Note: Special requirement on specifications can be satisfied through discussion.
| Specifications |
| | Item | Specifications(mm) |
| I. D Φd | O. D ΦD | Length L |
| BCN-1303 | 6.4-11 | 30 | 10-110 |
Note: Special requirement on specifications can be satisfied through discussion.
| Specifications |
| | Item | Specifications(mm) |
| I. D Φd | O. D ΦD | Length L |
| BCN-1304 | 0.8-2 | 6-10 | 10-80 |
Note: Special requirement on specifications can be satisfied through discussion.
| Specifications |
| | Item | Specifications(mm) |
| I. D Φd | O. D ΦD | Length L |
| BCN-1305 | 6.4-11 | 19-30 | 145-210 |
Note: Special requirement on specifications can be satisfied through discussion.
Complaint
