DESIGN STANDARD | BS EN 13355:2004+A1:2009 BS EN 60204:2006+A1:2009 | |
Cabin structure | Internal Dimension | 6900×3900×2800mm (L×W×H) |
External Dimension | 7010×5470×3350mm(L×W×H) | |
Basement | Base Design Forming | Two rows flat steel grids, three rows of metal anti-skip diamond Plate, floor(h):300mm, can not adjust |
Carrying capacity of grid | 650kg/wheel | |
Filter area | 10.4m2 | |
Drive-in-ramps | X2 ; size: 2000*530mm | |
Grid description | Size: 997X756mm, 40X3mm, pressed steel grating grille | |
Cabin | Cabin structure | Vertical wall plug |
Plenum height | 400mm | |
Wall panel | Wall panel | 50mm wall panel filled with heat-resistant rock wool |
Roof panel | Single layer galvanized plate bending forming | |
Door | Entrance Door | 3200×2550 mm (W×H); 2 + 1 structure; Containing frame, filled with heat-resistant EPS |
Working door | 800×2000 mm(W×H); frame structure working door; with safety glass observation window | |
Ceiling light | QTY and power | 8 sets of light fixtures, each 4X36W, 1152W in total |
Lighting arrangement | On both sides | |
Lighting description | IP55 lighting boxes, CE certified electronic rectifier, OSRAM lamp | |
Brightness | > 800Lux | |
Filtration System | Pre-filter | G2 grade pre-filter plate filter |
Ceiling filter | F5 class filter cotton, Model SP-600G | |
Bottom paint mist collecting | Fiberglass paint-resistance filters | |
Inlet System | Inlet fan | Adopt big impeller turbo fan |
Fan power and motor | 5.5KW, 970 rpm, 380 V, 50 Hz | |
Parameter of inlet fan | 18000m3/h , 650pa | |
Empty loaded air speed | +/- 0.18m/s | |
Noise | <78 db | |
Infrared system | Drying System form | Infrared ray |
Power | 10 units, 3X1KW/unit, total 30KW | |
Arrangement | 4 units on both sides, 2 units on back wall | |
Control system | Implementation of standards | BS EN 60204:2006+A1:2009 |
Features | painting, baking, lighting, emergency stop switch, temperature display, failure indication | |
Special Item | Rated power:40KW |