Complaint
| Capacity (Optional) | High Pressure 0~100 Kg/ cm^2 (0.1kg/cm^2) |
| Unit (switchable) | Kpa, psi, kg/cm^2 |
| Accuracy | ± 0.5% |
| Pressure Range | 250~5600kpa |
| Load Resolution | 0.001 kgf/cm2 |
| Speed of Compression | High Pressure 170± 10ml/min |
| Specimen Clamping Force | >690kpa |
| Oil | 100% silicon oil |
| Sensing method | Pressure Transmitter |
| Indicating Method & Display | LCD |
| Material of the Ring | Stainless Steel SUS304 |
| Opening in Upper Clamp | 31.5 ± 0.05 mm Diameter |
| Opening in Lower Clamp | 31.5 ± 0.05 mm Diameter |
| Motor | Anti-vibration Motor 1/8 HP |
| Operation Method | Automatic |
| Dimension (L*W*H) | 445*425*525 mm |
| Weight | Approx. 70 kg |
| Power | AC220± 10%, 50 Hz (customer specific) |
| Power Capacity | 120W |
| Standard Configuration | Rubber Membrane 1 piece, Spanner 1 set, Correction Shim 10 sheets |
| Optional Configuration | Printer, Air Pump |
| Accessories | Rubber membrane Piece wrench Aluminum calibration foils Silicone oil |
General maintenance:
1. Clean: Maintain the machine cleanliness at any time, wipe the machine with cotton to keep it clean before and after each use.
2. Antirust:Spraying the rust oil on the surface of metal part of the machine weekly (2 hours after injection wipe)
3. Lubricating oil: Endorsement lubrication oil on transmission components in machines (such as Screw) monthly ( use an ordinary oil can).
4. Check the gear reducer oil should fill or replaced each half year.
5. Glycerol should be completely replaced every half year.
Packing & Delivery & Shipping
Replacement manuals
If you have an OTS chamber , we will do our best to help you in whatever way we can.
Manuals: PDF files of manuals for current models are available free. Please contact us to request a copy. Older and printed copies at additional charge.
Q1 : Can you customize the product?
A: Yes, we can customize any products according to requirements.
Q2 : How to choose the most suitable products?
A: Our professional team will give you the best suggestion,just be patiently to tell us the information about the parameters your required.
Q3 : Can you arrange installations and commissioning in our lab?
A: Firstly, for standard chamber we had 3-5 days commissioning before shipping , you just need link power in your lab, then can start to operate
Secondly; we had detailed operation manual with chamber , any problems you can find and solve in it
Thirdly, some of customized chambers we should to install and teach your team to operate .
For More Information .....
Please do not hesitate to contact us!!!
Or Send your inquiry below...
