Ruby Tipped Winder, Coil Winding Ruby Nozzle

HARTAI TECHNOLOGY INDUSTRY Co., Ltd is professional supplier for coil winding wire guide nozzle(tungsten carbide coil winding nozzle), wire guide tubes, wire guide eyelets, wire guide needles at competitive price.
Ruby tipped coil winding nozzle guides(ruby nozzle) are used on coil winding machines and cable machines for wire guide. It is made of stainless stee and ruby by precise processing and combination. The rigidity of ruby is above than level 9 and is just less than that of diamond. Ruby tiped coil winding nozzle guide is a single crystal and can be made with high brightness and cleanness. It can effectively protect paint film and ling term continual work.



Ruby tiped coil winding nozzle guides Features:

1. High Wear Resistance
This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing.

2. Scratch-Proofing
Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.

3. Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.

4. Precise Exit Radii
Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.



Specification:
Measurements:
Customize available by requested, outside diameter is governed by nozzle wall thickness. See the measurements drawing to confirm your nozzles measurements according to your winding machine and coil products.


Processing limit: D1≥ 0.2mm, D1≥ 0.7mm

NO	Item	Name	Model No.(mm)
			L		L1	D	D1	d1	d2	H
R2 Series
1	R2-001	RN0326-2-1006	26		6	2	1.0	0.3	0.6	---
2	R2-002	RN0326-2-0806	26		6	2	0.8	0.3	0.6	---
3	R2-003	RN0330-2-0807	30		7	2	0.8	0.3	0.4	---
4	R2-004	RN0326-2-1006	26		6	2	1	0.3	0.6	---
5	R2-005	RN0330-2-0807	30		7	2	0.8	0.3	0.4	---
6	R2-006	RN0330-2-0810	30		10	2	0.8	0.3	0.4	---
7	R2-007	RN0530-2-1008	30		8	2	1	0.5	0.5	---
8	R2-008	RN0535-2.5-1411	35		11	2.5	1.4	0.5	0.8	---
9	R2-009	RN0635-2-1610	35		10	2	1.5	0.5	0.8	---
10	R2-010	RN0535-2.5-1210	35		10	2.5	1.2	0.5	0.8	---
11	R2-011	RN0530-2-1208	30		8	2	1.2	0.5	0.8	---
12	R2-012	RN0830-2	30			2	2	0.8	0.8	---
R3 Series
1	R3-001	RN0330-3-1007		30	7	3	1.0	0.3	0.8	---
2	R3-002	RN0330-3-0807		30	7	3	0.8	0.3	0.6	---
3	R3-003	RN0430-3-1210		30	10	3	1.2	0.4	0.6	---
4	R3-007	RN0530-3-1311		30	11	3	1.3	0.5	0.8	---
5	R3-008	RN0323-3-1007P		23	7	3	1	0.3	0.8	16
6	R3-009	RN0514-3-1509P		14	9	3	1.5	0.5	0.6	6
7	R3-010	RN0311-3-1006P		11	6	3	1	0.3	0.6	5
8	R3-011	RN0530-3-1455		30	5.5	3	1.4	0.5	0.6	---
9	R3-012	RN0330-3-1535P		30	3.5	3	1.5	0.3	0.5	13
10	R3-013	RN0330-3-1012		30	12	3	1	0.3	0.6	---
11	R3-014	RN0821-3-2015P		21	15	3	2	0.8	1	6
12	R3-015	RN0615-3-1505		15	5	3	1.5	0.6	0.6	---
13	R3-016	RN0530-3-2014		30	14	3	2	0.5	0.5	---
14	R3-017	RN0426-3-1208		26	8	3	1.2	0.4	0.6	---
15	R3-018	RN0414-3-1309		14	9	3	1.3	0.4	0.6	---
16	R3-019	RN0334-3-1035P		34	3.5	3	1	0.3	0.6	8
17	R3-020	RN1030-3-2514		30	14	3	2.5	1	1.2	---
18	R3-021	RN0522-3-1608P		22	8	3	1.6	0.5	0.8	14
19	R3-022	RN1030-3-20145		30	14.5	3	2	1	1.2	---
20	R3-023	RN08115-3-2006P		11.5	6	3	2	0.8	1.1	5
21	R3-024	RN15115-3P		11.5	**	3	**	1.5	2	5.5
22	R3-025	RN08145-3-2085P		14.5	8.5	3	2	0.8	0.8	6
23	R3-026	RN10105-3		10.5	**	3	**	1	1	---
24	R3-027	RN1014-3		14	**	3	**	1	1	---
25	R3-028	RN0825-3-2520		25	20	3	2.5	0.8	1	---
26	R3-029	RN0829-3-2015		29	15	3	2	0.8	1.2	---
27	R3-030	RN0630-3-1465		30	6.5	3	1.4	0.6	0.8	---
28	R3-031	RN0545-3-1315		45	15	3	1.3	0.5	0.6	---
29	R3-032	RN0630-3-1406		30	6	3	1.4	1.2	0.6	---
R4 Series
1	R4-001	RN0843-4-2014P		43	14	4	2.0	0.8	0.8	20
2	R4-002	RN0843-4-2014P		43	14	4	2.0	0.8	1.0	20
3	R4-003	RN0330-4-1515		30	15	4	1.5	0.3	0.6	---
4	R4-004	RN0340-4-1006		40	6	4	1	0.3	0.6	---
5	R4-005	RN1043-4-2514P		43	14	4	2.5	1	1.2	20
6	R4-006	RN08285-4-2015		28.5	15	4	2	0.8	1.2

Company Info
HARTAI Technology Industry Co., Ltd , found in 2001, is a professional export company specializing in  coil winding machine accessories ,such as nozzle (moto nozzle, tungsten cabide nozzle, ruby nozzle, ceramic nozzle ),stainless steel wire guide pulley, ceramic roller ,ceramic parts ,wire tensioner and so on .