Mpt-1 Multi-Functional Magnetic Particle Detector Test Equipment

Min.Order: 1
Product origin: Beijing, China
Infringement complaint: complaintComplaint
US$ 1500 ~ 5000

Description
MPT-1 Multi-functional Magnetic Particle Detector
 I.  Brief Description
MPT-1 multipurpose magnetic detector, plus all the benefits of having a portable model, which also boasts some of the strengths of the mobile models, the bottom of the instrument panel is equipped with two outlets respectively supplied with the probe type A and type D, and AC and DC need the probe coil ring type O.
II. Selection of functions:
(1) D type probe:(electromagnetic yoke probe)
Is equipped with the relevant section and can test the flat piece and surface with alternating and direct current.

(2) A type probe: (horseshoe probe) It can be a variety of fillet welds, large parts of the inner and outer angle of the AC and DC local testing.
(3) O type probe:(ring coil) The intensity of the internal magnetic field to 180 Oe probe type O applicable crack detection of all workpieces that can be positioned coils are used to detect stress cracking of the workpiece (fatigue cracks are perpendicular to the axial direction) is very convenient, can also be used to demagnetization with the method of distance workpiece, tools and measuring tools that are accidentally magnetized from the factory can be destructive demagnetization.
The machine adopts SCR firing circuits, electronic components through rigorous analysis, aging treatment machines, and so the performance is stable and reliable, with low failure rate. The output voltage of the instrument is safe, it is the occasion is more appropriate not allowed to enter the high-voltage equipment to test.

III. Main technical parameters
1) D probe
Polar distance50-200mm (adjustable)
Hoisting capacityAC≥5kg, DC≥18kg(without joint)
Working current≥8A
Working voltageAC=38V, DC=10V
Weight2.5kg

2) A probe:
Pole distance: 20-160mm;
hoisting capacity: AC≥4.5kg and DC≥18kg;
power supply: AC=38V, DC=10V
Weight: 2.0kg.
3) O probe

Center magnetic field: 180Oe
Working voltage: AC=38V  DC=10V
Internal diameter: 150mm
Weight: 2.8kg
4) Specification of main frame
power supply: 220V±10% 50Hz 5A
Dimension: 262×130×228mm
Weight: 6.0kg
IV.  Operation and Maintenance
Please read the Operating Instructions carefully before operation to master the structure and technical performance of the instrument and check if the power supply is applicable for the instrument and the connection is proper. Switch on the power only after everything is checked proper. Check if the instrument is in a sound condition when the instrument is used for the first time or has been out of operation for long.
Operating steps:
(1). Connect the plug to the power supply socket and then connect the detecting head to the output socket.

(2). Switch on the power to turn on the indicator light, connect the instrument control circuit and enable the servo.(3).Keep a good contact between the detecting head and the work piece and turn on the switch on the detecting head. Then the instrument will be magnetizing the work piece and the working lamp will be on. Then release the switch to cut off the power supply and stop the magnetization;
(4).Please switch off the mains switch after use.
Troubleshooting:
(1) The indicator light remains off and the tester does not work after the mains switch is turned on. The fuselage is broken due to short circuit or overload.
(2) The indicator light remains off after the switch is turned on and the detecting head is working. The indicator light fails.
(3) The indicator light is on but the detecting head does not magnetize. There is something wrong with the main circuit or control circuit.
(4) Switch on the power and magnetization is enabled even without turning on the magnetization switch. There is something wrong with the control circuit or bidirectional controlled silicon.
 
V Note:
  1. The pacing of the Instrumentation: it is advisable to form continuous work in a while:                      Magnetization time ≤ 3s
                         Time intermittent ≥ 5s.
  2. Before use, check if the power supply meets the requirements the instrument, if it is higher or lower can damage the instrument or affect the impact test.
  3. When the tip of the probe should be used to maintain good contact with the proven work piece, and then press the change of the magnetization, then it is time to better effect of magnetization.
  4. Although this instrument is a good circuit protection of load, but when used, the workload should be avoided to reduce the unnecessary increase.
  5. This instrument can work continuously, if you find some parts there is severe fever, you should to use, and can then be used to identify the reasons.
  6. Instrument and accessories should be used or stored in clean, dry, non-corrosive environment.
  7. When repair, note that the high risk of the machine.
  8. When the switch is pressed work of magnetization can not change the power.
  9. Instrument case must be grounded.
  10. If you can not repair circuit fault, please return the instrument to our factory service center

Product Tag:
Related categories:
Scroll to Top