Description
Low Price Hot Sale Plastic Household Product Spoon/Cup/Hanger/Basin/Busket Making Injection Molding Machine
Our new type dream series Plastic molding machine price is very good, it's energy saving effect reaches to 50%~70%, especially more for products need long cycle time. It was promote many technical points as following:
CLAMPING UNIT:
-T-slot board easy for making and logistic management
-A big row angular, international popular design, adopted, (combined with technology Netsta and Demag), small clamping force required, clamping and opening run fast and smoothly
-All plates through UG finite element analysis, receiving a force evenly
INJECTION UNIT:
-Multi-specification of injection equivalent, modularization design for meeting the requests from customer.
-Twin cylinder nozzle movement as standard, connection between nozzle and mold is stable to ensure no leaking of materials.
-More detailed division and specialization of design for screw and barrel according to different plastic materials to ensure the injection precision as well as processing requests of various materials.
Electric Control
-4 transducers as standard make machines more easy and convenient to operate.
-Except for standardization, the design of electrical boxes explored the features with intense current, light current and servo driver to be separated, signal interference reduced to the lowest degree and big area to promote heat loss as well as repair and maintenance conveniently in terms of effective fault reduction.
| | Unit | D200S |
| ITEMS | A | B | C |
| INECTION UNIT | Screw Diameter | mm | 45 | 50 | 55 |
| Screw L/D Ratio | L/D | 22.2 | 20.0 | 18.2 |
| Shot Size(Theoretical) | cm 3 | 358 | 442 | 535 |
| Injection Weight | g | 326 | 402 | 486 |
| Injection Pressure | MPa | 237.9 | 192.7 | 159.3 |
| Injection Rate into Air | cm 3 /s | 139.8 | 174.7 | 172.6 | 215.7 | 208.8 | 261 |
| Injection Stroke | mm | 225 |
| Injection Speed | cm/s | 8.8 /11 |
| Screw Speed | rpm | 192 /240 |
| CLAMPING UNIT | Clamping Force | KN | 2000 |
| Clamping Stroke | mm | 540 |
| Space Between Tie Bar | mm | 530*530 |
| Max. Mold Height | mm | 560 |
| Min. Mold Height | mm | 220 |
| Eject Stroke | mm | 150 |
| Eject Force | KN | 67 |
| No. Of Ejector Pins | piece | 9 |
| OTHERS | Max. Pump Pressure | MPa | 17.5 |
| Pump Motor Power | KW | 18.5 | 22.0 |
| Heater Power | KW | 11.8 |
| Hopper Capacity | Kg | 50 |
| Oil Tank Capacity | L | 400 |
| Weight | T | 6.7 |
Our servo system was the energy saving device that can save Min.50% electricity power for larger models of injection molding machine
Complaint
