Architecture Industry Weather Resistant Polyester Powder Coating for Exterial Use

Architecture Industry Weather Resistant Polyester Powder Coating for Exterial Use

Paint by
Electrostatic spray gun & curing oven.

POWDERS
Chemistry: Epoxy
Particle size: Suitable for electrostatic spray
Storage: Dry ventilation conditions below 30ºC
Curing schedule:180ºC/15minutes
Specific gravity: 1.2-1,8g/cm3 up to colors

Basic information
This is powder coating based on epoxy resin with outstanding chemical,
mechanical and corrosion resistance properties. These characteristics, together with its FDA compliance,
make it suitable as a non-toxic, protective coating in many indoor applications ,including tap ware,
bathroom fittings, water-tanks, drum linings etc.

Quality Data Sheet

No.	Item	Index	Testing  Result
1	Appearance (visual )	Homogeneous color without any agglomerate	Homogeneous color without any agglomerate
2	(GB/5237-2000) Appearance of film	Smooth	Smooth
4	(GB/T9761-88) Color	similar color	similar color
		△E<0.5	Conform
5	(%)  (GB/T9754-88) Gloss (60 gauge head )	80%min	Conform
6	(GB/T1732-93) Impact resistance	50kg.cm direct pass	50kg.cm direct pass
7	(GB/T6739-86) Pencil hardness	1H	1H pass
8	(GB5237-2000) Adhesion (cross cut test )	O-1 level	O level pass
9	(GB/T6742-86) Bending test (tapering spindle)	3mm	3mm  pass
10	mm(GB/5237-2000 ) Ericshen	6mm	6mm pass
11	(PSD)	30-40	Conform
12	Anti Weather test	xenon lamp 1000hours	pass
13	Anti-Salt test	500hous pass	pass
Note		Result	Pass

Raw material
Pure Epoxy powder coating contains pure epoxy resins and other little addtives

STORAGE                                                                    
1.Under dry conditions,good ventilation at a temperature not exceeding 30 C,humidity<60%
2.Storage period recommended should not exceed 12 months,in case exceeding 12 months without affecting their free flowing properties, the powder will still have optimal characteristics.
3.Should be protected from excessive heat,humidity,water and contamination with foreign materials such as powder, dust, dirt, etc.
4.Any leftover powder should be kept in an appropriate area that is cool and dry. Do not expose to the air too long as the powder properties may deteriorate with the moisture