Description
Product description:
Travel pumps are designed for continously handling the most difficult hype BG(H) gigher abrasive slurries which contain too big solids to be pumped by common pump.They are suitable for delivering slurries in Mining, Explosive sludge in metal melting.Dredging in dredger and course of rivers, and other fields.Type BGH pumps are of high head ones.
Construction of this pump is of single casing connected by means of clamp bands and wide wet passage.The wet parts are made of Ni-hard and high chromium abrasion-resistance alloys.The discharge direction of pump can be oriented in any direction of 360 degree.This type of pump possesses the advantages of easy installation and operation, good performance of NPSH and abrasion-resistance.
Structure drawing:
Performance Chart:
|
BG(H) Gravel Sand Slurry Pump Performance Table | |
| |
Pump
Model |
Allowable
Max. Power |
Clear Water Performance | | |
Capacity Q |
Head
H(m) |
Speed
n(r/min) |
Max.Eff.
η% |
NPSH
(m) |
Impeller
Dia. | |
m 3 /h |
l/s | |
100BG-D |
60 |
36-250 |
10-70 |
5-52 |
600-1400 |
58 |
2.5-3.5 |
378 | |
| 150BG-E |
120 |
126-576 |
35-160 |
6-45 |
800-1400 |
60 |
3-4.5 |
378 | |
200BG-S |
560 |
216-936 |
60-260 |
8-52 |
500-1000 |
65 |
3-7.5 |
533 | |
| 200BGH-S |
560 |
180-1440 |
50-400 |
24-80 |
500-950 |
72 |
2.5-5 |
711 | |
| 250BG-G |
600 |
360-1440 |
100-400 |
10-60 |
400-850 |
65 |
1.5-4.5 |
667 | |
250BGH-G |
600 |
288-2808 |
80-780 |
16-80 |
350-700 |
73 |
2-10 |
950 | |
300BG-G |
600 |
576-3024 |
160-840 |
8-70 |
300-700 |
68 |
2-8 |
864 | |
| 350BG-G |
600 |
720-3600 |
200-1000 |
18-44 |
300-500 |
70 |
3-9 |
1016 | |
| 350BGH-TU |
1200 |
324-3600 |
90-1000 |
26-70 |
300-500 |
72 |
3-6 |
1270 | |
1. This series of gravel pumps are horizontal centrifugal pumps with a single pump shell structure.
Broadly speaking, it also belongs to a kind of slurry pump.
2. The pump body and pump cover are clamped by special clamps, and the outlet direction of the pump can be at any position of 360 degrees, which is easy to install and use.
3. The bearing assembly of the gravel pump adopts a cylindrical structure, which is convenient to adjust the gap between the impeller and the pump body, and can be removed as a whole during maintenance.
4. The bearings are lubricated with grease.
5. There are three types of shaft seals for gravel pumps: packing seal, expeller seal, and mechanical seal.
6. The gravel pump has a wide flow path, good cavitation performance, high efficiency and abrasion resistance.
7. The main transmission methods are: V-belt transmission, elastic coupling transmission, Gear reducer transmission, hydraulic coupling transmission, SCR speed control, etc.
8. Material of Wet parts: nickel-containing high-chromium wear-resistant alloy.
9. The use of multiple speeds and multiple variants makes the pump run under the best conditions.
10. Long service life, high operating efficiency, and can meet many types of harsh transportation conditions.
FAQ1. What Products does BODA pump mainly produce?
BODA mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample.
2. Is BODA direct factory or trader?
BODA own foundry workshop, Machining Workshop, and Assembly workshop.
Welcome to visit our factory anytime.
3. The Min MQQ
The MQQ is one pcs spare parts or one set bare pump
4. What information is required for quotes?
If you need the spare parts, we need to know the parts Code and material.
If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more detailed the better.
Welcome to Contact Me
Shijiazhuang Boda Industrial Pump Co.,Ltd : alisa
Complaint
