Complaint
Product description:
This thickness gauge is designed for measurement of electric wires an insulator and coating thickness and design, to take the table type, scale bolt on the base, do not need to hand, for a variety of samples can accurately measure.
The thickness gauge: in accordance with GB/T2951.1-2008 standard (cross-sectional area measured terms about thickness measurement: contact pressure no more than 0.07 N/was, if in doubt, no greater than 0.02 N/was a pointer type thickness gauge).
Technical parameters:
1. The fixed button (dial indicator spreaders) : adjustable height, must first to unscrew, height adjustment, must tighten.
2. Load weight: in accordance with the test need to be replaced, please.
Standard configuration: 40 + 2 gf (with) when in doubt, 1 140 plus or minus 2 gf (special requirements, and the other order).
3. The dial indicator: indicates the thickness.
The mitutoyo dial indicator, indicator type; Measuring range: 0.01 ~ 10 mm, minimum degree: 0.01 mm.
4. The dial indicator pressing handle: downward, can lift pressure probe.
5. Bolt (under) : test support measure, standard specification: acuity ø 70.0 mm.
6. Press the knife probe (over) : Φ 5.0 + / - 0.02 mm, 1 piece
Our main product:
Factory:
Package:
