Description
Introduction:
Hydro cyclone Filter is a separation equipment with high efficiency which utilizes centrifugal force field to separate particles. BAITE has been focused on research,development and manufacture of cyclone for nearly 30 years. We are one of the leading cyclone brand manufacturers in the world for the moment.
BAITE Hydro cyclone Filter has been widely applied in ferrous and non-ferrous metal mines, non-metal mines, coal mines, electric power environmental protection, chemicals & fertilizers, oilfields, construction and other fields.
BAITE cyclones' workmanship have become very mature in mine industry application like grinding & classification, thickening, dewatering, desliming, fine material classification as well as tailing back fill, damming and stacking and also has leading technical advantages in the industry
Feature:
Feature:
1. Hydro Cyclone Separator is a kind of equipment for classifying the ore pulp by using centrifugal force.
2. Hydro Cyclone Separator has no motion and dynamic parts, but requires matching with corresponding slurry pump.
3.Cyclone desander is based on fluid solid particles in the desander in screening principle when rotating in cyclone and filter made, as a whole, in the field of water treatment to achieve sand removal, and descending the turbid,solid-liquid separation effect is remarkable.
4.Suitable for dry fine powder classifying,powders of ball shape ,flake shape and needle shape,also powders with different densities.
5.Product size from classifier can vary from D97:2 micron to 150 micron.The product size is adjustable,which makes the change of product size easy and simple.
6.Classifying efficiency(extraction rate) can be between 60% and 90%.Material with good flow-ability would have high classifying efficiency,otherwise,the classifying efficiency would be low.
7.Vertical classifier wheel would have low ratation speed,low wear and low motor power.
Technical Parameters
NO.
Model
Capacity
(m³/h)
Partion size
(um)
Diameter of the
overflow opening
(mm)
Sediment opening diameter
(mm)
Feeding pwessure
(MPa)
1
150
10-23
25-74
30-50
8-22
0.060-0.15
2
200
17-38
28-80
40-65
16-32
3
250
24-53
30-82
65-100
16-40
4
300
40-100
36-90
65-120
20-40
5
350
56-118
40-100
80-120
30-70
6
375
74-157
42-105
90-135
30-70
7
450
90-192
44-110
100-150
30-70
8
500
128-300
50-115
130-220
35-100
9
610
200-468
57-125
160-260
65-110
10
660
237-524
60-130
180-280
80-150
FAQ
Q: Are you a factory ?
A:Yes,we are factory, which was established in 2006.
We focus on providing expert service including design, manufacture, installation & maintenance for the logistic industries & warehouse equipment.
Q: Terms of Payment:
A:30% of the total amount by TT as deposit, the balance to be paid by TT or L/C at sight before the machines leaving seller' factory.
100% irrevocable L/C at sight.
Q:Time for preparation of goods:
A:The above machines shall be ready for delivery during 45 days from the date of receiving the deposit/LC, excluding the time of waiting for shipment. If there is any delay of delivery caused by seller, 3‰ of the total amount shall be paid to buyer each day, but this amount shall not exceed the amount of deposit; if the delay is caused by buyer, 3‰ of the total amount shall be paid to seller each day, but this amount shall not exceed 10% of total value of machines.
Q:Guarantee period:
A:The guarantee period for the above machines is twelve months from the date of putting into use, but not exceeds twenty-four months after the machines leaving seller's factory. It is not applicable for quick wear parts.
Q: May I know the status of my order?
A: Yes. We will send you informatio
Complaint
