Description
Q125 2000A High accuracy bus bar ac clamp on current transformer
The model Q125 2000A High accuracy bus bar ac clamp on current transformer measuring instrument can be used for a current vector for the copper bar or the power aluminum bus bar on-line detection.
Applications1. Electric energy meter calibrator (on site)
2. Double clamp type ground resistance tester
3. Double clamp type phase volt-ampere meter
4. Digital multi-meter
5. Multi-function energy meter
6. Oscilloscope
7. Power quality analyzer
8. Matched instruments
9. Calibration instrument on site
Features1. Measurement range of 1mA to 3000A AC
2. Small, compact size; holding wire diameter 120mm×50mm
3. Improved ergonomic design and easy operation
4. Low phase shift for power measurement
5. With load capacity ≤4Ω; When 1A output, it is 0.1Ω; When 5A output, it is 2.5VA.
6. Output model: Lead output(2.5m)
ParametersElectrical parameters | |
Ratio | 1000: 1 or 2000:1 (customized) |
Accuracy class | 0.2%, 0.5%, 1% |
Primary current | 0 - 3000A AC |
Secondary current | 0 - 5A AC (customized) |
Max. Cont. Input current | 3600A |
Over voltage category | CAT III 600 V |
Frequency range | 40Hz-2000Hz |
Dielectric strength | 3KV 50Hz/60Hz at 1 minute |
Temperature range | -20°C to +55°C |
Output | 2.5 meter cable with D01 connector |
Max. voltage not insulated conductors | 600 V |
Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 |
Installation | Clamp type |
Output mode | Lead output (2.5m) |
Mechanical parameters | |
Dimensions (L x W x H) (mm) | 116 x 327 x 35 |
Weight (g) | 1200 |
Holding wire diameter (mm) | φ120 x 50 |
Max. jaw opening (mm) | 50 |
Jaw color | White |
Material | PC+ABS+Polycarbonate, UL94 V0 |