Complaint
The global power supply works anywhere in the world and offers PFC ( Power Factor Correction).
It is a switching power supply easily deals with a very high variation in the AC mains voltage: it can drop by up to 20% below its nominal level (e.g. to 180VAC instead of 230VAC ) without any loss of the amplifier's rated output power. Aregulated power supply also presents some other sonic advantages, such as better cone control and the same fast response as a linear power supply.
Features:
1) High power - FP amplifier delivers unprecedented output power of total 10,000W(4X2500W@2ohms) in only 2U frame
2) Good sound quality - FP amplifier not only maintains Class A/B favored sound quality and reliability but also with Class D efficiency.
3) Regulated Switch Mode Power Supply (RSMPS) - Xtd2300H2 is able to remain constant output power even with wide fluctuation of external mains voltage
4) Efficient cooling system - Unique cooper cooling system allows more heat dissipation at extended peak output.
5) XLR signal input and link connectors.
6) Comprehensive protection - Equips with protection circuitry for excessive output current, DC, over heat, very high frequency (VHF), short circuit, open load, main fuse protection and soft start
| Model Number | FP-10000Q | FP-6000Q | FP14000 | FP-9000 |
| 8Ω Stereo power(RMS) | 4 x 1350 W | 4 x 700 W | 2 x 1500 W | 2 x 1300 W |
| 4Ω Stereo power (RMS) | 4 x 2100 W | 4 x 1000 W | 2 x2200 W | 2 x 2150 W |
| 2Ω Stereo power (RMS) | 4 x 2500 W | 4 x 1550 W | 2 x 3000 W | 2 x 3000 W |
| 8Ω Bridged power | 2 x 4200W | 2 x 2600W | 4000W | 4200W |
| 4Ω Bridged power | 2 x 5000 W | 2 x 3100 W | 6500 W | 7000 W |
| THD at 1kHz and 1dB below clipping | 0.10% | |||
| FREQUENTY RESPONSE | 20Hz-25KHz ±0.5dB | |||
| Input connectors | Combo XLR type, 3pin | |||
| Link connectors | XLR type, 3pin male | |||
| Input Impedance | 20KΩ Balanced / 10KΩUnbalanced | |||
| Output connectors | speaker connectors | |||
| Dimensions (H x W x D) | 485x 378 x 89 mm | 88 x 483 x 440 mm | ||
| Net Weight (kg) | 13 | 14 | 11 | 11 |
| Specification | |||
| MODLE | K-1100 | K-1500 | K-1800 |
| 8Ω Stereo power(RMS) | 2 x 1100 W | 2 x 1500 W | 2 x 1800 W |
| 4Ω Stereo power (RMS) | 2 x 1700 W | 2 x2200 W | 2 x 3000 W |
| 2Ω Stereo power (RMS) | 2 x 2500 W | 2 x 3000 W | 2 x4800 W |
| 8Ω Bridged power | 3000w | 4000w | 6000w |
| 4Ω Bridged power | 5000 W | 6500 W | 9500 W |
| THD at 1kHz and 1dB below clipping | 0.10% | ||
| Slew rate | 20V/μs | 30V/μs | 40V/μs |
| Damping Factor | 1000 | 1000 | 1000 |
| FREQUENTY RESPONSE | 20Hz-25KHz ±0.5dB | ||
| Input connectors | Combo XLR type, 3pin | ||
| Link connectors | XLR type, 3pin male | ||
| Input Impedance | 20KΩ Balanced / 10KΩUnbalanced | ||
| Output connectors | speaker connectors | ||
| Operation Indication | Blue | ||
| Power Requirement | 100-120V~50-60Hz | ||
| Gain Selectable(dB) | 41dB 32dB 26dB | ||
| Load Matching | 0, -2, -4, -5dB | ||
| Dimensions (H x W x D) | 88 x 483 x 440 mm | ||
| Net Weight (kg) | 11 | 11 | 12.5 |
| Gross Weight (kg) | 11 | 11 | 12.5 |
