| Application Data |
| The product can be applied by | Brusher, Scroller, Shaver, Trowel, etc. |
| Cleaning of painting tools | GP Thinner ; Alcohol |
| Theoretical coverage | 195-250g/m2 |
| Drying times | Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will be affected correspondingly. |
| Directions for use |
| Surface preparation | The grease, smirch, rust, moisture of the contacted surface must be cleaned off,surface of bamboo, leather or rubber etc must be matted. |
| Recommended apply system |
| Brushing | The effect will be better if stir thoroughly or make the pot inverted repeatedly in order to mix the glue before use. The contacted surface is brushed by the adhesive in thin layer, brushing toward a same aspect for air getting out to strengthen the powerful viscidity. |
| Airing | Wait for 5 to 25 minutes (25 Celsius) after brushing, until the condition is proper to agglutinate. |
| Average dry time at 77°F/25°C 5 - 15 minutes |
| Contacting | Contacting is level one time because the viscidity is super powerful, add pressure or tapping for the super viscidity of continua adhesive. |
| Remarks |
| The most suitable temperature and humidity for contacting (bonding): 20°C -30°C,humidity: 55%-75% |
| Adhesive contains VOC, easily burnt, keep away from fire. Make sure the construction site is well ventilated. |
| No. of Regulation On Transporting Dangerous Goods: 32196 |
Complaint
