Tire Shredder Machine /Tire Blocks Recycling Machine /Rubber Powder Production Line

Min.Order: 1
Product origin: Qingdao, Shandong, China
Infringement complaint: complaintComplaint
US$ 15000

Description
Tire shredder machine /tire blocks recycling machine /Rubber powder production line 



The waste tire recycling machine is a piece of new innovative equipment. Rubber powder production line is used for processing used tires and rubbers to fine rubber powders. 
End product size can reach 30-120 mesh free of steel wire and fiber.

 Product Description
waste tyre -- tyre debeader -- tyre cutting machine -- whole tyre shredder -- big conveyor equipment -- rubber crusher -- big shaking screen -- small conveyor equipment -- magnetic separator -- small shaking screen -- fiber separator -- 5-30 mesh powder -- rubber fine grinder -- 40-120 mesh powder. 
 

Tire debeader
 
 
 

The first step in tire recycling procession
Heavy duty body
Hooks and cross pulling die made of 45# steel, tempered and quenched
Equipped with protection frame avoiding the dangers during working
Two series: hydraulic one and mechanic one
Easy to operate and change spare parts (hooks and cross pulling die)

Tire cutter
 
 

Cutting tires into pieces before shredding
Small tire pieces are easier to process in shredder
Knives made of YG-20 steel, long using time
Hydraulic control
One clamping cylinder and one cutting cylinder
Equipped with a roller platform to process big tires

Tire shredder
 
 
 

The high-capacity shredder was specially developed for direct size reduction of tires into cleanly cut tire chips, size 50x50 mm. cutting shafts for the production of larger tire chips are available high torque at low speed cut even the strongest tires into pieces.
All construction characteristics are designed for continuous operation in order to achieve highest throughput rates at lowest costs.
Extremely precise tolerances between the cutting knives produce cleanly cut tire chips at low energy consumption.
The cutting knives made of high quality alloy steel can be re-sharpened and reused which increases the service life and reduces the operating costs.
The complete cutting chamber is lined with hard wear plates.
Large doors allow for easy access into the cutting chamber.

Tire cracker 
 
 
 
 
 
 
 

The shear between the two rollers will make tire chips into powders as well loosen rubbers, steels and textiles
Roller body made of cast steel
Surface of roller made of alloy steel, welded when worn out
One flat surface roller and one teethed roller, high throughput of powders
Bottom made of cast iron
Emergency stop when overload
Distance between the two rollers can be adjusted.
Hard gear gearbox
Equipped with screening machine, magnetic separator and fiber separator, 99% purified rubbers will be got.
Finals: 8-30 mesh

Magnetic separator
 
 
 
 
 

Muti-stage belt style magnetic separator can reach more purified rubbers
Separated steels will be in one place, easy to collect
Permanent magnet, no more power consumption

Fiber separator
 
 
 
 

After the grinder, the nylon wires will be grinded into fluff; According to centrifugal force, density difference, the fluff will be separated.
The spin fans inside the cyclone barrel driven by the motor throw the compounds to the wall, at this time, light fluff will be upwards and fall down into the inside barrel; heavy rubbers will fall down directly, so textiles will be separated

Pulverizing unit
 
 
 

The pulverizing unit is made of 3 sets pulverizers with a cyclone silo.
The pulverizer consists of frame, main motor, non-pole reducer, feeding device, adjusting device and a pair of rotating disc and fixed disc.
The fine powders will be achieved by the grinding and shearing of the two pin discs.
The machine is cooled by water and air to ensure the quality of the powders.
Non-pole reducer can adjust speed of the feeding device to meet the material demands.
The cyclone silo will collect the rubber power without dust
Finals: 30-120 mesh







 About us:

We are one of the biggest manufacturer and exporter of rubber machinery in north of
CHINA. it was first established in October, 1976 and had experienced over-30year history o producing rubber machinery. Owning more than 530 employees, floor area of 58 thousand sqm, building area of 34 thousand sqm and fixed assets of 62.8 million yuan, the company mainly provides light commercial tyre, rubber products and various equipments such as flat vulcanizing machine, banbury mixer, rubber fining mixer, rubber cutting machine, blown-film unit, extruder and tyre building machine.
Leading parts having won "high-quality products" titles of municipal, provincial and national grade, our products got manufacturing license awarded by Chemical Department in 1988 and passed ISO9002 International Quality Standard System Attestation in 1997, endowing the company with self-supporting importing right and the designation of National Second-grade Metering Unit. The company was awarded as Qingdao High-tech Enterprise and Provincial Contract and Credit Keeping Enterprise. In 2003, the company finished the production value of 183.65 million yuan and sales revenue of 1.16126 billion yuan, with profit of 3.72 million yuan and tax of 5.13 million yuan.
Superior in geographic position, the company is located by the side of 204 national highway, 20km from Qianwan Harbor in the east, more than 10km from Shugang Highway in the south, 30km from Jiaozhou Railway in the north and 2 km from Tongsan Highway in the west. Holding topping technique, service and quality, corporate board chairman Mr. pang kimsun with his staff sincerely welcome communication an guidance from clients both home and abroad.
Product Tag:
Related categories:
Scroll to Top