Elevate Efficiency: Durable and Precise Rubber Single Knife Hydraulic Press Cutting Machine

INTRODUCTION
The machine is used to cut the natural rubber, compound rubber and other plastic material
Feature:
1.Slef-auto operation
2.Hydraulic system, low noise, run steadily
3.The work pressure, stroke can be adjusted according to the client's production technic.
4. This machine is adopted gantry structure,Hydraulic drive system. It is contained with body, hydraulic system, power system, operation table.
5..Push the press button, the knife-row goes down to the lower limited, the knife-row will goes up automatically till to the top limit. Take out the rubber block, feed into the new rubber block the cutting operation will be repeated.

TECHNICAL PARAMETERS





FAQ
About machine performance quality
1.      Q:  How to guarantee the quality of outsourcing parts?
          A:  First choice more than 2 suppler by tender, There are strict system and process for inspecting outsourcing parts. And there are outsourcing inspectors, after inspection, qualified goods, labeling and storage. Not qualified, return.
2.      Q:  Which brand of electric part?
          A:  Use world famous brands, Siemens, Omron, Toshiba, Schneider, ABB
Customer can specify the brand.
3.      Q:   How to control the quality?
          A:   There are inspectors for inspecting equipment quality and performance, after assembly, machine run continuously for at least 12 hours at one time, Total running time should be not less than 48 hours.

About after-sales service
1.       Q: What is the warranty time?
           A:  2 years after machine arrived at factory
2.       Q:  How to solve the problem?
           A:  Within one hour after getting customer' problem, inform the solution way, there are three ways for different conditions.
           1, Which can be solved by phone or Email, it will be solved in two hours.
           2. Which can be solved by Remote Control, it will be solved within four hours(machine is equipped by Remote Network Control Problem).
           3. Which need solve it on site, engineer arrive at factory within one week(in the two years warranty date, engineer has the visa any time of the country where the machine.