SL203 Educational Equipment Teaching Equipment Vocational Training Equipment Fundamentals of temperature measurement


 

• 1. Description
  Measuring pressure is important in the engineering industry, e.g. in plant, turbomachine and aircraft construction and in process engineering. Other fundamental factors such as flow rate or flow velocity can also be determined based on a pressure measurement.
  
  The SL 203 experimental unit enables the user to measure the pressure with two different measuring methods: directly by measuring the length of a liquid column (U-tube manometer, inclined tube manometer) and indirectly by measuring the change of shape of a Bourdon tube ( Bourdon tube pressure gauge).
  
  In a tube, the pressure causes the liquid column to move. The pressure difference is read directly from a scale and is the measure for the applied pressure. In inclined tube manometers, one leg points diagonally up. Changes the length of the liquid column significantly.
  
  The principle of the Bourdon tube pressure gauge is based on the change in cross-section of the bent Bourdon tube under pressure. This change in cross-section leads to an expansion of the Bourdon tube diameter. A Bourdon tube pressure gauge is therefore an indirectly Acting pressure gauge where the pressure differential is indicated via a transmission gearing and a pointer.
  
  In experiments, pressures in the millibar range are generated with a plastic syringe and displayed on the manometers. The experimental unit is equipped with two Bourdon tube pressure gauges for measuring positive and negative pressure. The U-tube manometer, inclined tube manometer and Bourdon tube Pressure gauges at the experimental unit can be combined using tubes. A calibration device enables calibration of an additional Bourdon tube pressure gauge using a weight-loaded piston manometer.
  
  2. Technical details
  Specification
  Basic experiments for measuring pressure with three different measuring instruments
  U-tube and inclined tube manometer
  One Bourdon tube pressure gauge each for positive and negative pressure
  Plastic syringe generate test pressures in the millibar range
  Calibration device with Bourdon tube pressure gauge for calibrating mechanical manometers
  Technical data
  Inclined tube manometer
  Angle: 30°
  Measuring ranges
  Pressure:
  0...±60mbar (Bourdon tube pressure gauge)
  0...500mmWC (U-tube manometer)
  0...500mmWC (inclined tube manometer)
   

Product Details and Warranty

We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.

We supply 3 years warranty time. Please se photo for foreign sales department and photo for spare parts.

Packaging & Delivery

Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.

Arrange delivery within 45 days upon receipt of payment.

Please see below photo for detailed package.

Company Information

We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today's and tomorrow's careers.

Photo for Clients Visiting Factory



 

Photo for Workshop and Equipments




 

Service

We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.

Certificate

Our products takes ISO9001 product management system.