Categories

22kv High Voltage Electrical Glazed Porcelain Pin Insulator
22kv High Voltage Electrical Glazed Porcelain Pin Insulator
22kv High Voltage Electrical Glazed Porcelain Pin Insulator
22kv High Voltage Electrical Glazed Porcelain Pin Insulator
22kv High Voltage Electrical Glazed Porcelain Pin Insulator
22kv High Voltage Electrical Glazed Porcelain Pin Insulator

22kv High Voltage Electrical Glazed Porcelain Pin Insulator

Min.Order: 1
Product origin: Suizhou, Hubei, China
Infringement complaint: complaintComplaint
US$ 11

Description
The Composite Insulators 






The Composite Insulators comply with the latest editions of and amendments to, the standards/specification listed below:
 
CSA                                CANADIAN STANDARDS ASSOCIATION
 
G164-4                       -      Hot dip galvanizing of Irregular Shaped Articles
 
CAN/CSA                 -      Quality Assurance Program Categories 2299.3
 
ANSI                          -     AMERICAN NATIONAL STANDARDS INSTITUTE
 
C29.1                          -     American Standard Test Method For Electrical Power Insulators
 
C29.7                          -     American Standard For Wet-processed Porcelain Insulators (High Voltage Line Post Type) Electrical Power Insulators
 
987-1985                    -      IEEE Guide For Application of Composite Insulators
 
D750                           -     Recommended Practice for Operating Light and Weather Exposure Apparatus (Carbon Arc Type) For Artificial Weather Testing Of Rubber Compounds.
 
D1499                         -     Recommended Practice For Exposure of Plastics.
 
D2240                         -     Rubber Properties, Durometer Hardness
 
D2565                         -     Recommended Practice For Operating Xenon-Arc Light And Water Exposure Apparatus Plastics.
The weathershed of the Post Insulators shall be manufactured from either Hydrated Alumina Ethylene Propylene Copolymer (EPM) as the primary constituent or Silicone Elastomers. The weathershead shall be injection moulded and brought to final cure state in one continuous process to prevent internal undercure or surface overcure. Additionally, the weathershead shall provide hydrophobic surface, even after exposure to tropical marine environment, ultra violent rays and moisture.
Core

 
The rod or the core is manufactured from Fibreglass, having 70-75 by weight of auxiliary aligned glass fibre bonded by an organic resin. The rod is either be cast or pultruded.
The end fittings are have the following properties:
 



i.         are compressed onto the Fibreglass rod member
ii.        are  not move relative to the central Fibreglass rod at applied loads equal to two times the rated Routine Test Load or maximum designed cantilever loads
iii.       are attracted to the rod after completion of all external heat processes used to cure or bond component parts.
 
The insulator are  provided load limiting bases that will deform under longitudinal loading of more than 100% of the rated design cantilever load. 
Performance Characteristics
 
The Polymeric Insulators are meet the under listed performance characteristics.
 
 
           ITEM		 
              11kV		 
              33KV
 
Dry Flashover Withstand		 
              90kV      		 
              180kV
 
Wet flashover withstand 		 
              70kV		 
              165kV
 
Positive Impulse Critical flashover		 
             145kV		 
               300kV
 
Maximum Radio Interference Voltage 		 
Below 1micro volt		 
  Below 1 micro volt        
 
Design Tension Strength		 
              100kN		 
               100kN
 
Residual Strength after Power Arc		 
                80kN		 
                80kN
 
Mechanical Proof Test Load		 
               45kN		 
                 45kN
 
Maximum Sustained Load		 
               34kN		 
                 34kN
 
Design Torque Rating		 
              83 Nm		 
                 83 Nm
 
 


The insulator are suitable for accepting both aluminium and copper conductors having cross-sectional areas ranging from 35mm2 to 265mm2. The insulators are designed for mounting on the angle and channel crossarms specified in Specification E14
 
All exposed ferrous part shall be treated against corrosion. Treatment by hot dip galvanizing is preferable.
 
 
Related products
22kv High Voltage Electrical Glazed Porcelain Pin Insulator
22kv High Voltage Electrical Glazed Porcelain Pin Insulator
US$ 11
Electrical Porcelain Ceramic Type Pin Insulator St-20j for High Voltage
Electrical Porcelain Ceramic Type Pin Insulator St-20j for High Voltage
US$ -1
High Voltage Porcelain Insulator 33kv Pin-Type Insulator Ceramic Insulator
High Voltage Porcelain Insulator 33kv Pin-Type Insulator Ceramic Insulator
US$ 5 ~ 30
High Voltage Pin Insulator/ Porcelain Ceramic Insulator Manufacturer
High Voltage Pin Insulator/ Porcelain Ceramic Insulator Manufacturer
US$ 3
Esp 95 Porcelain High Voltage Porcelain Shaft Electrical Ceramic Insulator
Esp 95 Porcelain High Voltage Porcelain Shaft Electrical Ceramic Insulator
US$ 10 ~ 25
High Voltage Electrical Transformer Post Electrical Porcelain Insulator Epoxy Bushing
High Voltage Electrical Transformer Post Electrical Porcelain Insulator Epoxy Bushing
US$ 50
33kv High Voltage P-33-Y 900mm Pin Porcelain Insulator
33kv High Voltage P-33-Y 900mm Pin Porcelain Insulator
US$ 5.59 ~ 6.89
High Quality Electrical Installation Spherical Type 11kv Pin Porcelain Insulator
High Quality Electrical Installation Spherical Type 11kv Pin Porcelain Insulator
US$ 2.69 ~ 3.99
Customers Also viewed
33kv High Voltage Isolating Switch Gang Insulator Porcelain Cutout Fuse Ceramic Dropout Fuse Fuse Cutout Gang Insulator Isolating Switch 11kv15kv 22kv 36kv
33kv High Voltage Isolating Switch Gang Insulator Porcelain Cutout Fuse Ceramic Dropout Fuse Fuse Cutout Gang Insulator Isolating Switch 11kv15kv 22kv 36kv
US$ -1
High Voltage for Transmission Line Pin Type 56 Series Electrical Porcelain Ceramic Pin Insulators
High Voltage for Transmission Line Pin Type 56 Series Electrical Porcelain Ceramic Pin Insulators
US$ 1 ~ 5
High Voltage Porcelain Insulator Ceramic Insulator Glass Insulator Composite Insulator Polymeric Silicone Rubber Insulator 11kv 33kv Disc Tension Cap
High Voltage Porcelain Insulator Ceramic Insulator Glass Insulator Composite Insulator Polymeric Silicone Rubber Insulator 11kv 33kv Disc Tension Cap
US$ 4.3
Porcelain Drop Fuse Cutout Insulator for High Voltage Transmission Line
Porcelain Drop Fuse Cutout Insulator for High Voltage Transmission Line
US$ 21.68
High Voltage Power Transmission Line Solid-Core Post Porcelain Insulator
High Voltage Power Transmission Line Solid-Core Post Porcelain Insulator
US$ 50
Product Tag:
Related categories:
Scroll to Top