Complaint
Mineral Processing equipment operates in some of the harshest and remote locations. It is crucial to the Mineral Processing industries that this equipment continues to operate efficiently and its lifecycle is maximised to minimise down time. By appropriately protecting equipment from the extreme wear caused by the high speed and flow rates of ore when processed as a slurry ensures better equipment longevity. Slurry is highly abrasive and can not only cause wear damage to wet processing equipment but also with the inclusion of chemicals and heat, there is constant risk of corrosion and dangerous leakage.
Wear Protection ceramic Linings are used throughout Mineral Processing to protect the steel surfaces of equipment from wear and corrosion. They are used on a range of equipment including pipes, tanks, chutes, pumps, flotation cells, thickeners, launders and feed spouts or chutes.
Ceramic wear liners range include composite ceramic liners or Steel backed and studded as per requirements. We also have a range of molded ceramic in rubber with CN backing. The liners can be customized depending on the application.
Lining rubber is designed primarily to be applied as a lining to protect your equipment from the damaging effects of abrasion and impact forces or chemical attack.
ZTA liners performed exceptionally well compared with previous chrome overlays installed which is not suitable for this application. The news installed ceramic liners lasted for 13 months
| S.No | Material | Attibutes | Properties |
| 1 | Ceramic Tiles | Material | 92%,95%,T95%,99%,ZTA |
| 2 | Rubber | Component | natural rubber, nitrile-butadiene rubber, Flame Retardant, others |
| Density | ~1.4g/cm3 | ||
| Tensile strength at break | ≥10.6Mpa | ||
| Elongation at break | ≥350% | ||
| Shore hardness | 65±5 | ||
| Adhesive between tile and rubber | ≥3.8Mpa | ||
| Adhesive between rubber and equipment | ≥3.5Mpa | ||
| Thermal conductivity. (normal temperture) | 2w/m.k | ||
| Aging period | 15years | ||
| Working temperature | ·-50ºC-200ºC | ||
| 3 | Steel plate | Material | Q235A |
| Denisty | 7.85g/cm3 | ||
| Thickness | 3-8mm | ||
| 4 | Adhesive | Apperance | Brown glutinous liquid |
| Solid content | 20±3% | ||
| Viscosity | ≥2.5Mpa | ||
| Peel strength | 48h N/2.5cm≥120 | ||
| Compressive strength | ≥850Mpa | ||
| Working temperature | '-20ºC-100ºC |
| Whole plate(mm) | 150x300,300x300,500x500,600x450 etc |
| Ceramic Size(mm) | Square Tile: 10x10,20x20,33x33,50x50,100x100,150x100,etc |
| Hexagonal Tile: 12x3, 12x6, 19x7, 19x12.5, 19x25, etc | |
| Locking block with lock and groove: 38*38, 40*40, 30*30, etc | |
| Dimple Tile: 20x20 with 5dimples, 20x30 with 18 dimples, 20x30 with 13 dimples, 20x20 with 1 semi-spherial surface | |
| Ceramic Thickness(mm) | 3-75mm |
| Alloy Steel Size(mm) | thicknedd 3-10mm |
| Rubber Thickness(mm) | Depends on the impact stress expected |
| Ceramic Cylinder/rod | 6x6mm, 15x15mm, 20x20mm, 31x31mm, 40x40mm, 50x50mm etc |
1.Established in 1997,25 years experience in wear solutions products.
2.Factory is under expanding, the total construction area is 50,000 sqm.
3.ISO9001:2015 certified,over350 staffs.
4.Three Own-designed production lines, the ball mils are own produced.
We supply a wide range of pre-engineered alumina ceramic tiles tailor-made to suit any type of application such as short and long radius small and large bore pipes and pipe bends, square to round transitions, cones etc. The company also supply and install a range of pump impellers, expeller rings, and valves.
QMX provides wear resistant solutions to all industries including Mining, Mineral , Base & Precious Metal Smelting, Power Generation (coal fired power stations), Iron and Steel, Cement & Lime Manufacture, and Petro-Chemical Refining and Production.
1.Are you a direct manufacturer or trader?
We has been founded on 1997 and now has developed into a group company owning three factories, manufacturing alumina powder, alumina grinding media, wear resistant ceramic liner.
Also we have our own vulcanizing plant which manufacture rubber backed ceramic panel.
2.Can you supply samples to check the quality?
Free samples with small quantity can be sent for quality checking.
Express fee can be reduced from bulk order.
3.What is the delivery time?
Most of the rubber backed ceramic panel is customized as customers' application condition. Generally it takes 7~30 days according to the quantity.
4.What is your payment term?
T/T, L/C at sight can be accepted. Also it can be communicated.
5.What is your main markets?
We exported the panels to Australia, Russia, Ukraine, Mongolia, New Zealand, Chile, Peru, South Africa and so on.
6.Can you accept small order?
Yes, orders small or big are from your trust. We will do our best to meet your requirements.
7.Can you receive orders with bulk quantity?
Yes, the production capacity is 18000 tons per year. We have ability to accept the big orders.
8.Can you speak English?
Yes, our staff can speak and write English very well. We can supply 7*24 service and can reply your inquiry within short time.
9. Besides the rubber backed ceramic panel, what other products you manufacture?
We also can manufacture plain ceramic liner, weldable ceramic liner, trapezoidal ceramic liner, curved ceramic liner, ceramic grinding media, ZTA 370/380 grinding media, silicate zirconia grinding media, yttria stabilized zirconium grinding media, ceria zirconium grinding media, alumina powder, yttria zirconium powder and so on.
10.Where are you located?
Our factory is in Zibo city, Shandong province, North of China. Zibo is an famous industrial city in China and we are near Jinan airport. Welcome to visit our factory.
1. 92%,95%,T95%,99% Alumina ceramic tiles
2. ZTA(Zirconia Toughened Alumina) tiles/brick/block
3. Ceramic Rubber and ceramic-Rubber-steel impact resistant liner
4. Monolihic Cyclone/ cyclone tiles/Ceramic Lined pipe fittings
5. High impact ceramic wearing compound
